Eiki LC-SD12 owner manual Input Source Selection Component, RGB Scart 21-pin

Video input

Input Source Selection ( Component, RGB Scart 21-pin )

Direct Operation

Choose Computer by pressing the INPUT button on the top control or the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

INPUT button

Video

Computer

Menu Operation

1	Press the MENU button to display the On-Screen Menu. Press
	the Point 7 8 buttons to move the red frame pointer to the
	Input Menu icon.
2	Press the Point d button to move the red arrow pointer to
	Computer and then press the SELECT button. The Source
	Select Menu will appear.
3	Move the pointer to the source that you want to select and then	Input Menu icon
	press the SELECT button.	INPUT MENU

Component	When the input source is coming from video
	equipment connected to the COMPUTER IN
	/COMPONENT IN terminal with a Component-VGA
	Cable, select Component.

Move the pointer (red arrow) to Computer and press the SELECT button.

RGB (Scart)

Note :

When the input source is coming from video equipment connected to the COMPUTER IN /COMPONENT IN terminal with a Scart-VGA Cable, select RGB (Scart).

Source Select Menu

Move the pointer to

–Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page 51 for order.

Component or RGB ( Scart ) and press the SELECT button.

Video Input

31