Eiki lc-sb15 owner manual Computer Input, Computer System Selection, Auto, Mode, Svga

Page 25

Computer Input

Computer System Selection

This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the projector. When selecting computer input, the projector automatically displays the most proper image for the input signal. One of the following four displays appears on the system menu icon. If the projector does not tune the input signal and the projected image is not displayed properly, or when you wish to adjust it manually, perform manual adjustment as described on page 27 and 28.

Auto

When the projector cannot recognize the connected PC System Menu

signal as PC system provided in this projector, the Auto

 

 

PC Adjustment function operates to adjust the projector

 

and the message “Auto” is displayed in the PC System

 

Menu icon. When the image is not provided properly,

 

manual adjustment is required. (p27, 28)

 

There is no signal input from the connected computer.

– – – –

Check the connection of the computer and see if the

 

 

projector is set correctly.

 

(See “Troubleshooting” on page 45.)

 

User preset adjustment in Computer Adjustment.

Mode 1

Adjustment data can be stored in Mode 1 - 5. (page 27,

 

 

28.)

 

Computer systems provided in the projector. The

SVGA 1

projector chooses a proper system and displays it.

 

The Auto PC Adjustment func- tion operates to adjust the pro- jector.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually if some PC systems appear on the On-Screen Menu.

1Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right buttons to move the red frame pointer to the PC System Menu icon.

2Press the Point Down button to move the red arrow pointer to the system that you want to set, and then press the SELECT button.

PC System Menu

The PC System Menu icon displays the system being selected.

The systems on this dialog box can be selected.

Custom Mode (1~5) set in the

PC Adjust Menu. (p27, 28)

25

Image 25
Contents Model LC-SB15 Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsInstalling the Projector in Proper Position Safety InstructionsAir Circulation Moving the ProjectorFederal Communication Commission Notice ComplianceFor Continental Europe ComplianceFor the U.S.A. and Canada 200 240 V ACFeatures and Design Front Part Names and FunctionsBack BottomTerminal Part Names and FunctionsUi o TopSignal Emission indicator Remote ControlPointer Function Laser Pointer FunctionWireless Mouse Operation Remote Control CodeRemote Control Batteries Installation Remote Control Operating RangeAdjustable Feet InstallationPositioning the Projector Connecting to a Computer InstallationTerminals Connecting to Video EquipmentProjector Turning On the Projector Basic OperationTurning Off the Projector Focus Adjustment Zoom AdjustmentKeystone Adjustment Basic OperationSound Adjustment Timer FunctionNo Show Function Direct OperationOn-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Input Source Selection Computer InputRGB Computer System Selection Computer InputAuto ModePC Adjust Menu Computer Adjustment AutoTo store adjustment data Auto PC AdjComputer Adjustment Manual Mode free ResetDisplay area To store adjustment data To clear adjustment dataImage Level Selection Image Level Adjustment Screen Size Adjustment Input Source Selection Video, S-Video Video InputInput button Video Computer Video button Video Source Select Menu VideoInput Source Selection Component, RGB Scart 21-Pin Video InputComponent RGB ScartVideo or S-Video Video System SelectionAuto AV System Menu Video or S-VideoImage button Standard Cinema CinemaTint ColorProgressive Resets all adjustment to their previous figure Setting SettingSetting To change the code for the projector To change the code for the remote controlProjector is shut down and the Warning indicator lights red Maintenance and CleaningTOP Control Then check the items belowCleaning the Air Filters Maintenance and CleaningCleaning the Projection Lens Cleaning the Projector CabinetReset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Projector is OFF. The AC power cord is unplugged Indicators and Projector ConditionImage Select Image Adjust Screen PC AdjustMenu Tree InputImage Adjust Screen Sound SettingImage Select Resolution Compatible Computer SpecificationsFreq KHzTechnical Specifications Terminal HDB15-PIN Pin Configuration Configurations of TerminalsTerminal DVI-I Pin Configuration DVI-I Terminal DIGITAL/ANALOGOptional Parts Service Port ConnectorPOA-MACAP KA-DV20Attaching the Lens Cover Page Key to better communications Canada