Eiki lc-sb15 Indicators and Projector Condition, Projector is OFF. The AC power cord is unplugged

Page 47

Appendix

Indicators and Projector Condition

Check the indicators for projector condition.

Indicators

	WARNING	LAMP	Projector Condition
POWER	WARNING	REPLACE
red/green	red	yellow

			The projector is OFF. (The AC power cord is unplugged.)

✽The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.

			✽	The projector is ready to be turned on with the POWER ON-OFF button.

			✽	The projector is operating normally.

			✽	The projector is in the Power management mode.

The temperature inside the projector is abnormally high. The projector can- not be turned on. When the projector is cooled down enough and the

✽temperature returns to normal, the POWER indicator lights red and the pro- jector can be turned on. (The WARNING . indicator keeps flashing.) Check and clean the Air filter.

The projector has been cooled down enough and the temperature returns

✽to normal. When turning on the projector, the WARNING indicator stops flashing. Check and clean the air filters.

The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the

✽projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the pro- jector on. It may cause electric shock or a fire hazard.

• • • lights green.

• • • flashes green.

• • • lights red.

• • • flashes red.

• • • off

✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp replace counter after replacement of the lamp. See page 43 and 44.

47

Image 47

Contents Model LC-SB15 Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Safety InstructionsInstalling the Projector in Proper Position Air CirculationFederal Communication Commission Notice Compliance200 240 V AC ComplianceFor Continental Europe For the U.S.A. and CanadaFeatures and Design Bottom Part Names and FunctionsFront BackTerminal Part Names and FunctionsUi o TopSignal Emission indicator Remote ControlPointer Function Laser Pointer FunctionWireless Mouse Operation Remote Control CodeRemote Control Batteries Installation Remote Control Operating RangePositioning the Projector InstallationAdjustable Feet Connecting to a Computer InstallationProjector Connecting to Video EquipmentTerminals Turning Off the Projector Basic OperationTurning On the Projector Basic Operation Zoom AdjustmentFocus Adjustment Keystone AdjustmentDirect Operation Timer FunctionSound Adjustment No Show FunctionOn-Screen Menu Remote ControlOn-Screen Menu Top ControlMenu Bar RGB Computer InputInput Source Selection Mode Computer InputComputer System Selection AutoAuto PC Adj Computer Adjustment AutoPC Adjust Menu To store adjustment dataComputer Adjustment Manual To clear adjustment data ResetMode free Display area To store adjustment dataImage Level Selection Image Level Adjustment Screen Size Adjustment Source Select Menu Video Video InputInput Source Selection Video, S-Video Input button Video Computer Video button VideoRGB Scart Video InputInput Source Selection Component, RGB Scart 21-Pin ComponentAV System Menu Video or S-Video Video System SelectionVideo or S-Video AutoImage button Standard Cinema CinemaProgressive ColorTint Resets all adjustment to their previous figure Setting SettingSetting To change the code for the projector To change the code for the remote controlThen check the items below Maintenance and CleaningProjector is shut down and the Warning indicator lights red TOP ControlCleaning the Projector Cabinet Maintenance and CleaningCleaning the Air Filters Cleaning the Projection LensReset the Lamp replace counter Lamp ReplacementLamp Replace Counter When the lamp replace counter is reset, the LampAppendix TroubleshootingAppendix Projector is OFF. The AC power cord is unplugged Indicators and Projector ConditionInput PC AdjustImage Select Image Adjust Screen Menu TreeImage Select Sound SettingImage Adjust Screen KHz Compatible Computer SpecificationsResolution FreqTechnical Specifications DVI-I Terminal DIGITAL/ANALOG Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Terminal DVI-I Pin ConfigurationKA-DV20 Service Port ConnectorOptional Parts POA-MACAPAttaching the Lens Cover Page Key to better communications Canada