Eiki LC-SX6A, LC-X6A owner manual USB Series B, C Jack, Usb, Serial Port OUT

Page 13

Preparation

q

w

u

y

t

r

e

q INPUT 4 (Vacant for Optional Interface Board)

t USB (Series B)

 

 

 

This port is used for the projector maintenance.

Preparation

Optional interface board can be installed into this slot. (p21, 73)

wINPUT 5 (Vacant for Optional Interface Board)

Optional interface board can be installed into this slot. This input accepts digital signals only. (p21, 73)

eR/C JACK

Connect the remote control to this jack with the wired remote cable (not supplied) to use the remote control as wired. (p25)

rUSB

Connect a USB mouse (commercially available) to control On-Screen Menu. (p25)

A built-in micro processor which controls this unit may occasionally malfunction and needs to be reset. This can be done by pressing the RESET

button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

ySERIAL PORT OUT

This terminal outputs signal from SERIAL PORT IN. When controling more than two projectors from a computer, connect the other projector to this terminal with a serial cross cable (commercially available).

uSERIAL PORT IN

When controling the projector from a computer, connect the computer to this terminal with a serial cross cable (commercially available).

13

Image 13
Contents LC-SX6A Compatibility My Menu Selection Features and DesignTable of Contents Risk of Electric Shock Do not Open To The OwnerVoor de klanten in Nederland Safety InstructionsPositioning Precautions Setup In Proper DirectionsAir Circulation Bottom Front Downward Upward UsualUSE Caution in Carrying or Transporting the Projector Moving the ProjectorFederal Communication Commission Notice ComplianceParts Name PreparationFront BackIndicators Top Control Input 2 terminals TerminalsC Jack USB Series BUSB Serial Port OUTAbout Control Pad Remote Control4REMOTE RESET/ON/ALL-OFF switch Timer buttonFreeze button CH buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Installation InstallationLens Installation Positioning the ProjectorLevel Adjustable Feet Lens Shift AdjustmentAdjustable feet For Continental Europe Connecting AC Power CordFor the U.S.A. and Canada 200 240 V ACInterface Board Slots Connection TerminalsOption Control No Cables used for connection Connecting to Computer Digital and Analog RGBVideo Cable w S-Video Cable e DVI-D Cable Connecting to Video Equipment Digital and VideoBNC Cable Scart-VGA Cable e Component Cable Connecting to Video Equipment Component and RGB ScartBasic Operation Wireless Remote Control OperationOperating the Projector Mouse OperationBasic Operation and Reference Buttons Top Control Remote ControlPad Turning On the Projector What is PIN code?Enter a PJ PIN code Turning Off the Projector Remote Control Zoom and Focus AdjustmentShutter Function Top ControlInput Selection Auto PC AdjustmentInformation Timer Function Keystone AdjustmentScreen Selection Picture Freeze FunctionZoom + Zoom +/- FunctionZoom Remote Control Operation How to Operate On-Screen MenuTop Control Operation Mouse OperationControl bar for Mouse Operation Menu icon GuideMouse cursor Item dataMenu icons What You Can Do with Each Menu Menu Icons and Their FeaturesInput InputRGB Scart When video input signal is connected to When the input source is analog comingWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoComponent Signal Selection Video or S-Video Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentPC Adjustment Computer AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Reset Sync phasePosition ModeImage Image AdjustmentFor PC Input For AV InputImage Adjust Color temp Auto picture controlRed GreenNoise reduction GammaProgressive FilmScreen Setting Screen SettingScreen Keystone ZoomCeiling RearSetting SettingLanguage MenuEnter a Logo PIN code LogoLamp BackgroundPower management Power managementDisplay Input searchLens memory Analog outShutter Security Shutter ManagementKey lock USB lockTo Change PJ PIN Code To Change the PJ PIN Code settingExits the Setting menu Factory defaultSpecial SpecialFan control FilterRS-232C Test patternUSB memory Information Exits Warning log menuAll indicators except the Lamp indicator are blinking Maintenance and CleaningThen check the matters below Filter cover Air filter Air Filter ReplacementReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Main Indicators Indicators and Projector ConditionProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardAir filter is clogged with dust or has been used overtime Shutter IndicatorLamp 1/2 Lamp Replace IndicatorsUntil cooling is completed Appendix TroubleshootingLens position moves when Input Wireless Remote ControlIs switched Some displays are not seenFreq Compatible Computer Specifications1080i/50 1080i/60Technical Specifications Optional Parts AccessoriesScreen Screen Menu TreeImage Image ADJ Special Lamp Dimensions USB Connector Series B Terminal ConfigurationsPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Numerics IndexAppendix Appendix Appendix Key to better communications Canada

LC-X6A, LC-SX6A specifications

The Eiki LC-SX6A and LC-X6A projectors are advanced devices designed for professional presentations and high-quality visual experiences. With a focus on outstanding image clarity and versatile performance, these projectors cater to a wide range of applications, from corporate meetings to educational environments.

Both models feature a powerful 6,000 ANSI lumens brightness, ensuring that presentations remain visible even in well-lit rooms. The high contrast ratio of 5,000:1 further enhances their capability by providing deeper blacks and more vibrant colors, enabling the audience to experience rich and dynamic visuals. The native resolutions are WUXGA (1920 x 1200) for the LC-SX6A and XGA (1024 x 768) for the LC-X6A, making them suitable for projecting detailed images and text.

One of the standout technologies incorporated in these projectors is the 3LCD system, which allows them to achieve exceptional color accuracy and uniform brightness. This means that users can expect true-to-life colors in their presentations, making the visuals more engaging and effective. Furthermore, Eiki’s Intelligent Color Management technology helps adjust color settings based on the content being projected, providing optimal viewing experiences tailored to specific applications.

Connectivity is another strong suit of the Eiki LC-SX6A and LC-X6A. They come equipped with multiple input options including HDMI, VGA, USB, and more, ensuring compatibility with a wide array of devices such as laptops, tablets, and media players. This versatility makes setup and operation seamless, reducing the time needed for technical preparations.

Both projectors feature a robust design aimed at durability, making them ideal for frequent use in various environments. Additionally, they include a lamp life of up to 6,000 hours in eco mode, which significantly lowers maintenance costs and extends the intervals between replacements.

To enhance user convenience, the projectors include features like a built-in camera for real-time monitoring and wireless options for remote presentations. They also come with a comprehensive suite of image optimization settings, allowing users to fine-tune projection quality according to their specific needs.

In summary, the Eiki LC-SX6A and LC-X6A projectors deliver a perfect blend of brightness, color fidelity, and connectivity that meets the demands of modern presentations in educational and professional settings. Their innovative technologies and robust characteristics make them a valuable investment for anyone seeking reliable and high-quality projection solutions.