Eiki LC-SX6A, LC-X6A owner manual Indicators and Projector Condition, Main Indicators

Page 65

Maintenance and Cleaning

Indicators and Projector Condition

Main Indicators

Indicators

READY

WARNING

LAMP

Projector Condition

Green

TEMP

Red

 

Red

 

 

 

 

 

 

 

The projector is OFF. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.

The projector is ready to be turned on with the POWER ON-OFF button.

The projector is operating normally.

The projector is in the Power management mode.

 

 

 

The temperature inside the projector is abnormally high. The projector cannot

 

 

 

be turned on. When

the projector is cooled down enough and the

 

 

 

temperature returns to normal, the LAMP indicator lights red and the

 

 

 

projector can be turned on.

 

 

 

 

 

 

 

 

The projector has been cooled down enough and the temperature returns to

 

 

 

normal. When turning on the projector, the WARNING TEMP indicator stops

 

 

 

blinking. Check and clean the air filters.

 

 

 

 

 

 

 

 

The projector detects an abnormal condition and cannot be turned on. Unplug

 

READY, WARNING

 

 

TEMP, SHUTTER,

 

the AC power cord and plug it again to turn on the projector. If the projector

 

WARNING FILTER, LAMP

 

is turned off again, disconnect the AC power cord and contact the dealer or

 

1 REPLACE, AND LAMP 2

 

the service center for service and checkup. Do not leave the projector on. It

 

REPLACE indicators are

 

 

 

may cause electric shock or a fire hazard.

 

 

blinking all together.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LED Conditions:

• • • Off

• • • Lighting

• • • Dim lighting

• • • Blinking

Maintenance & Cleaning

65

Image 65
Contents LC-SX6A Compatibility My Menu Selection Features and DesignTable of Contents Risk of Electric Shock Do not Open To The OwnerVoor de klanten in Nederland Safety InstructionsPositioning Precautions Setup In Proper DirectionsAir Circulation Bottom Front Downward Upward UsualUSE Caution in Carrying or Transporting the Projector Moving the ProjectorFederal Communication Commission Notice ComplianceParts Name PreparationFront BackIndicators Top Control Input 2 terminals TerminalsC Jack USB Series BUSB Serial Port OUTAbout Control Pad Remote Control4REMOTE RESET/ON/ALL-OFF switch Timer buttonFreeze button CH buttonWired Remote Control Transmitter Remote Control TransmitterRemote Control Channel and ID Setup Remote Control ID Remote Control Battery InstallationRemote Control Channel & Frequency Installation InstallationLens Installation Positioning the ProjectorAdjustable feet Lens Shift AdjustmentLevel Adjustable Feet For Continental Europe Connecting AC Power CordFor the U.S.A. and Canada 200 240 V ACOption Control No Connection TerminalsInterface Board Slots Cables used for connection Connecting to Computer Digital and Analog RGBVideo Cable w S-Video Cable e DVI-D Cable Connecting to Video Equipment Digital and VideoBNC Cable Scart-VGA Cable e Component Cable Connecting to Video Equipment Component and RGB ScartBasic Operation Wireless Remote Control OperationOperating the Projector Mouse OperationPad Top Control Remote ControlBasic Operation and Reference Buttons Enter a PJ PIN code What is PIN code?Turning On the Projector Turning Off the Projector Remote Control Zoom and Focus AdjustmentShutter Function Top ControlInformation Auto PC AdjustmentInput Selection Timer Function Keystone AdjustmentScreen Selection Picture Freeze FunctionZoom Zoom +/- FunctionZoom + Remote Control Operation How to Operate On-Screen MenuTop Control Operation Mouse OperationControl bar for Mouse Operation Menu icon GuideMouse cursor Item dataMenu icons What You Can Do with Each Menu Menu Icons and Their FeaturesRGB Scart InputInput When video input signal is connected to When the input source is analog comingWhen the input source is component Move a pointer to Input 2 and press the Select buttonSystem SystemPC System Selection AutoComponent Signal Selection Video or S-Video Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentPC Adjustment Computer AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Reset Sync phasePosition ModeImage Image AdjustmentFor PC Input For AV InputImage Adjust Color temp Auto picture controlRed GreenNoise reduction GammaProgressive FilmScreen Screen SettingScreen Setting Keystone ZoomCeiling RearSetting SettingLanguage MenuEnter a Logo PIN code LogoLamp BackgroundPower management Power managementDisplay Input searchShutter Analog outLens memory Security Shutter ManagementKey lock USB lockTo Change PJ PIN Code To Change the PJ PIN Code settingExits the Setting menu Factory defaultSpecial SpecialFan control FilterUSB memory Test patternRS-232C Information Exits Warning log menuThen check the matters below Maintenance and CleaningAll indicators except the Lamp indicator are blinking Filter cover Air filter Air Filter ReplacementLamp Lamp ReplacementReset the Lamp time Lamp Handling Precautions Attaching the Cord Cover Strap Cleaning the Projection LensCleaning the Projector Cabinet Main Indicators Indicators and Projector ConditionProjector is OFF. The AC power cord is unplugged May cause electric shock or a fire hazardAir filter is clogged with dust or has been used overtime Shutter IndicatorUntil cooling is completed Lamp Replace IndicatorsLamp 1/2 Appendix TroubleshootingLens position moves when Input Wireless Remote ControlIs switched Some displays are not seenFreq Compatible Computer Specifications1080i/50 1080i/60Technical Specifications Optional Parts AccessoriesScreen Screen Menu TreeImage Image ADJ Special Lamp Dimensions USB Connector Series B Terminal ConfigurationsLogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Numerics IndexAppendix Appendix Appendix Key to better communications Canada

LC-X6A, LC-SX6A specifications

The Eiki LC-SX6A and LC-X6A projectors are advanced devices designed for professional presentations and high-quality visual experiences. With a focus on outstanding image clarity and versatile performance, these projectors cater to a wide range of applications, from corporate meetings to educational environments.

Both models feature a powerful 6,000 ANSI lumens brightness, ensuring that presentations remain visible even in well-lit rooms. The high contrast ratio of 5,000:1 further enhances their capability by providing deeper blacks and more vibrant colors, enabling the audience to experience rich and dynamic visuals. The native resolutions are WUXGA (1920 x 1200) for the LC-SX6A and XGA (1024 x 768) for the LC-X6A, making them suitable for projecting detailed images and text.

One of the standout technologies incorporated in these projectors is the 3LCD system, which allows them to achieve exceptional color accuracy and uniform brightness. This means that users can expect true-to-life colors in their presentations, making the visuals more engaging and effective. Furthermore, Eiki’s Intelligent Color Management technology helps adjust color settings based on the content being projected, providing optimal viewing experiences tailored to specific applications.

Connectivity is another strong suit of the Eiki LC-SX6A and LC-X6A. They come equipped with multiple input options including HDMI, VGA, USB, and more, ensuring compatibility with a wide array of devices such as laptops, tablets, and media players. This versatility makes setup and operation seamless, reducing the time needed for technical preparations.

Both projectors feature a robust design aimed at durability, making them ideal for frequent use in various environments. Additionally, they include a lamp life of up to 6,000 hours in eco mode, which significantly lowers maintenance costs and extends the intervals between replacements.

To enhance user convenience, the projectors include features like a built-in camera for real-time monitoring and wireless options for remote presentations. They also come with a comprehensive suite of image optimization settings, allowing users to fine-tune projection quality according to their specific needs.

In summary, the Eiki LC-SX6A and LC-X6A projectors deliver a perfect blend of brightness, color fidelity, and connectivity that meets the demands of modern presentations in educational and professional settings. Their innovative technologies and robust characteristics make them a valuable investment for anyone seeking reliable and high-quality projection solutions.