Eiki LC-X6A, LC-SX6A owner manual Lamp Replacement, Reset the Lamp time

Page 62

Maintenance and Cleaning

Lamp Replacement

When the life of the projection lamps of this projector draw to an

Top Control

end, the LAMP 1 and 2 REPLACE indicators light orange. If one of

 

these indicators lights orange, replace the lamp with a new one

 

promptly.

 

CAUTION

For continued safety, replace with a lamp of the same type. Do not drop a lamp or touch a glass bulb! The glass can shatter and may cause injury.

Allow a projector to cool, for at least 45 minutes before you open the Lamp cover. The inside of the projector can become very hot.

LAMP 1 REPLACE

LAMP 2 REPLACE

indicator

indicator

These indicators light orange when the life of the projection lamps draw to an end.

Follow these steps to replace the lamp.

1

Turn off the projector and disconnect the AC plug. Allow the

 

projector to cool for at least 45 minutes.

2

Loosen each screw on the lamp covers with a screwdriver,

 

and remove the lamp covers.

3

Loosen two (2) screws of each lamp with a screwdriver and

 

pull out one lamp and another with grasping the handle.

4

Replace each lamp with a new one and tighten the two (2)

screws back into the positions. Make sure that the lamp is

 

set properly. Replace the lamp covers and tighten the

 

screws.

5

Connect the AC power cord to the projector and turn on the

 

projector.

6

Reset the Lamp time.

 

See Lamp on page 57.

CAUTION :

DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.

NOTES ON LAMP REPLACEMENT:

TO MAINTAIN QUALITY OF PICTURE (BETTER BALANCE OF COLOR AND BRIGHTNESS IN THE ENTIRE SCREEN), WE RECOMMEND REPLACING ALL 2 LAMPS AT A TIME.

Lamp covers

Screws

(Unremovable)

Lamp 1

Lamp 2

Handle

ScrewsHandle

62

Image 62
Contents LC-SX6A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Setup In Proper DirectionsPositioning Precautions Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticeFront PreparationParts Name BackIndicators Top Control Terminals Input 2 terminalsUSB USB Series BC Jack Serial Port OUTRemote Control About Control PadFreeze button Timer button4REMOTE RESET/ON/ALL-OFF switch CH buttonWired Remote Control Transmitter Remote Control TransmitterRemote Control Channel and ID Setup Remote Control ID Remote Control Battery InstallationRemote Control Channel & Frequency Lens Installation InstallationInstallation Positioning the ProjectorAdjustable feet Lens Shift AdjustmentLevel Adjustable Feet For the U.S.A. and Canada Connecting AC Power CordFor Continental Europe 200 240 V ACOption Control No Connection TerminalsInterface Board Slots Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Video Cable w S-Video Cable e DVI-D CableConnecting to Video Equipment Component and RGB Scart BNC Cable Scart-VGA Cable e Component CableOperating the Projector Wireless Remote Control OperationBasic Operation Mouse OperationPad Top Control Remote ControlBasic Operation and Reference Buttons Enter a PJ PIN code What is PIN code?Turning On the Projector Turning Off the Projector Shutter Function Zoom and Focus AdjustmentRemote Control Top ControlInformation Auto PC AdjustmentInput Selection Screen Selection Keystone AdjustmentTimer Function Picture Freeze FunctionZoom Zoom +/- FunctionZoom + Top Control Operation How to Operate On-Screen MenuRemote Control Operation Mouse OperationMouse cursor Menu icon GuideControl bar for Mouse Operation Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuRGB Scart InputInput When the input source is component When the input source is analog comingWhen video input signal is connected to Move a pointer to Input 2 and press the Select buttonPC System Selection SystemSystem AutoAV System Menu Video or S-Video Video or S-Video Signal SelectionComponent Signal Selection AV System Menu ComponentAuto PC Adjust Computer AdjustmentPC Adjustment Auto PC adjManual PC Adjust Position Sync phaseReset ModeFor PC Input Image AdjustmentImage For AV InputImage Adjust Red Auto picture controlColor temp GreenProgressive GammaNoise reduction FilmScreen Screen SettingScreen Setting Ceiling ZoomKeystone RearLanguage SettingSetting MenuLogo Enter a Logo PIN codeBackground LampDisplay Power managementPower management Input searchShutter Analog outLens memory Key lock Shutter ManagementSecurity USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuFan control SpecialSpecial FilterUSB memory Test patternRS-232C Exits Warning log menu InformationThen check the matters below Maintenance and CleaningAll indicators except the Lamp indicator are blinking Air Filter Replacement Filter cover Air filterLamp Lamp ReplacementReset the Lamp time Lamp Handling Precautions Attaching the Cord Cover Strap Cleaning the Projection LensCleaning the Projector Cabinet Projector is OFF. The AC power cord is unplugged Indicators and Projector ConditionMain Indicators May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeUntil cooling is completed Lamp Replace IndicatorsLamp 1/2 Troubleshooting AppendixIs switched Wireless Remote ControlLens position moves when Input Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree Screen ScreenImage Image ADJ Special Lamp Dimensions Terminal Configurations USB Connector Series BLogo PIN Code Lock No PIN Code Number MemoPIN Code Lock No Index NumericsAppendix Appendix Appendix Key to better communications Canada

LC-X6A, LC-SX6A specifications

The Eiki LC-SX6A and LC-X6A projectors are advanced devices designed for professional presentations and high-quality visual experiences. With a focus on outstanding image clarity and versatile performance, these projectors cater to a wide range of applications, from corporate meetings to educational environments.

Both models feature a powerful 6,000 ANSI lumens brightness, ensuring that presentations remain visible even in well-lit rooms. The high contrast ratio of 5,000:1 further enhances their capability by providing deeper blacks and more vibrant colors, enabling the audience to experience rich and dynamic visuals. The native resolutions are WUXGA (1920 x 1200) for the LC-SX6A and XGA (1024 x 768) for the LC-X6A, making them suitable for projecting detailed images and text.

One of the standout technologies incorporated in these projectors is the 3LCD system, which allows them to achieve exceptional color accuracy and uniform brightness. This means that users can expect true-to-life colors in their presentations, making the visuals more engaging and effective. Furthermore, Eiki’s Intelligent Color Management technology helps adjust color settings based on the content being projected, providing optimal viewing experiences tailored to specific applications.

Connectivity is another strong suit of the Eiki LC-SX6A and LC-X6A. They come equipped with multiple input options including HDMI, VGA, USB, and more, ensuring compatibility with a wide array of devices such as laptops, tablets, and media players. This versatility makes setup and operation seamless, reducing the time needed for technical preparations.

Both projectors feature a robust design aimed at durability, making them ideal for frequent use in various environments. Additionally, they include a lamp life of up to 6,000 hours in eco mode, which significantly lowers maintenance costs and extends the intervals between replacements.

To enhance user convenience, the projectors include features like a built-in camera for real-time monitoring and wireless options for remote presentations. They also come with a comprehensive suite of image optimization settings, allowing users to fine-tune projection quality according to their specific needs.

In summary, the Eiki LC-SX6A and LC-X6A projectors deliver a perfect blend of brightness, color fidelity, and connectivity that meets the demands of modern presentations in educational and professional settings. Their innovative technologies and robust characteristics make them a valuable investment for anyone seeking reliable and high-quality projection solutions.