Eiki LC-X6A, LC-SX6A owner manual Zoom, Keystone, Ceiling, Rear

Screen Setting

D.Zoom

D. Zoom +

Press the SELECT button at the D. Zoom +. The message “D. Zoom +” is displayed. Press the SELECT button to expand the image size. And use the Point buttons (e, d, 7, and 8) or the Control pad to pan the image. The Panning function can work only when the image is larger than the screen size.

D. Zoom –

Press the SELECT button at the D. Zoom –. The message “D. Zoom –” is displayed. Press the SELECT button to compress the image size.

✔Note:

To exit the D. Zoom +/– mode, try the followings:

•To return to the normal screen, change Input, or change the screen size.

•To exit the panning mode, press any button except the D. ZOOM button, the SELECT button, and the CH and ID buttons.

D. Zoom

Keystone

Keystone

This function corrects distortion of a projected image. Press the SELECT button at Keystone and the keystone dialog box appears. Adjust keystone with the Point buttons (e, d, 7, and 8) or the Control pad.

Press the Point 8 button or the Control pad at Keystone and select either Store or Reset with the Point buttons (e and d) or the Control pad, and then press the SELECT button to fix the selection.

Store . . . .stores the keystone adjustment even if the AC power cord is disconnected.

Reset . . . . .resets the keystone adjustment when the AC power cord is disconnected.

Ceiling

When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector.

Rear

When this function is “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.

✔Note:

•The True and D. Zoom +/– cannot be selected when projecting AV sources or selecting “480i”, “575i”, “480p”, or “575p” in the System menu (p38~39).

•This projector cannot display any resolution higher than 1600 X 1200. If your computer’s screen resolution is higher than 1600 X 1200, reset the resolution to the lower before connecting the source to the projector.

•The image data in other than XGA (1024 x 768 for LC-X6A) or SXGA (1400 x 1050 for LC-SX6A) is modified to fit the screen size in initial mode.

•The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used.

Ceiling

Rear

48