Eiki LC-X6A, LC-SX6A owner manual Lens Installation, Positioning the Projector

Page 18

Installation

Installation

Install the projector in a safe place. Before installation, read Safety Instructions thoroughly and check the installation place. Install the projector in a place with sufficient strength to support the projector's weight. Installation on an unstable stand, cart, or ceiling may cause serious injury or accidents.

Do not place the projector where is extremely hot and humid. Do not place the projector where is dusty and smoky. When installing the projector in dusty and smoky places or in a place for a long period of time, installation with Smoke Resist Box (AH-69601) separately supplied is recommended. (p73)

Lens Installation

Before setting up the projector, install optional lens in the projector. Install the lens following the instructions in the Lens Installation Manual provided. Ask the sales dealer for detailed information of optional lens specifications.

Do not move the projector with holding the lens mounted and its peripheral part. It may cause serious damages to the projector and the lens.

When moving or setting up the projector, check the followings again:

– Be sure that the lens is securely installed into the projector.

Be sure to replace Lens cap to protect lens

surface.

Lens cap

Be careful not to hold or subject a lens to strong forces. It may damage lens, cabinet, or mechanical parts.

Positioning the Projector

This projector is designed to project on a flat surface. Projector

SCREEN

should be perpendicular to the projection screen. Otherwise, the

projected image may be distorted. Keystone function allows you

 

to correct image distortions, but it should be considered that the

 

keystone correction may lower the image resolution. (p31)

 

Do not expose the projection screen to direct sunlight or

 

excessive ambient lighting. The projected image may get white-

 

tinged due to reflection and the best image quality may not be

 

obtained.

 

18

Image 18
Contents LC-SX6A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Setup In Proper DirectionsPositioning Precautions Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticeFront PreparationParts Name BackIndicators Top Control Terminals Input 2 terminalsUSB USB Series BC Jack Serial Port OUTRemote Control About Control PadFreeze button Timer button4REMOTE RESET/ON/ALL-OFF switch CH buttonRemote Control Transmitter Remote Control Channel and ID SetupWired Remote Control Transmitter Remote Control Battery Installation Remote Control Channel & FrequencyRemote Control ID Lens Installation InstallationInstallation Positioning the ProjectorLens Shift Adjustment Level Adjustable FeetAdjustable feet For the U.S.A. and Canada Connecting AC Power CordFor Continental Europe 200 240 V ACConnection Terminals Interface Board SlotsOption Control No Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Video Cable w S-Video Cable e DVI-D CableConnecting to Video Equipment Component and RGB Scart BNC Cable Scart-VGA Cable e Component CableOperating the Projector Wireless Remote Control OperationBasic Operation Mouse OperationTop Control Remote Control Basic Operation and Reference ButtonsPad What is PIN code? Turning On the ProjectorEnter a PJ PIN code Turning Off the Projector Shutter Function Zoom and Focus AdjustmentRemote Control Top ControlAuto PC Adjustment Input SelectionInformation Screen Selection Keystone AdjustmentTimer Function Picture Freeze FunctionZoom +/- Function Zoom +Zoom Top Control Operation How to Operate On-Screen MenuRemote Control Operation Mouse OperationMouse cursor Menu icon GuideControl bar for Mouse Operation Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuInput InputRGB Scart When the input source is component When the input source is analog comingWhen video input signal is connected to Move a pointer to Input 2 and press the Select buttonPC System Selection SystemSystem AutoAV System Menu Video or S-Video Video or S-Video Signal SelectionComponent Signal Selection AV System Menu ComponentAuto PC Adjust Computer AdjustmentPC Adjustment Auto PC adjManual PC Adjust Position Sync phaseReset ModeFor PC Input Image AdjustmentImage For AV InputImage Adjust Red Auto picture controlColor temp GreenProgressive GammaNoise reduction FilmScreen Setting Screen SettingScreen Ceiling ZoomKeystone RearLanguage SettingSetting MenuLogo Enter a Logo PIN codeBackground LampDisplay Power managementPower management Input searchAnalog out Lens memoryShutter Key lock Shutter ManagementSecurity USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuFan control SpecialSpecial FilterTest pattern RS-232CUSB memory Exits Warning log menu InformationMaintenance and Cleaning All indicators except the Lamp indicator are blinkingThen check the matters below Air Filter Replacement Filter cover Air filterLamp Replacement Reset the Lamp timeLamp Lamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetAttaching the Cord Cover Strap Projector is OFF. The AC power cord is unplugged Indicators and Projector ConditionMain Indicators May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeLamp Replace Indicators Lamp 1/2Until cooling is completed Troubleshooting AppendixIs switched Wireless Remote ControlLens position moves when Input Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree Screen ScreenImage Image ADJ Special Lamp Dimensions Terminal Configurations USB Connector Series BPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Index NumericsAppendix Appendix Appendix Key to better communications Canada

LC-X6A, LC-SX6A specifications

The Eiki LC-SX6A and LC-X6A projectors are advanced devices designed for professional presentations and high-quality visual experiences. With a focus on outstanding image clarity and versatile performance, these projectors cater to a wide range of applications, from corporate meetings to educational environments.

Both models feature a powerful 6,000 ANSI lumens brightness, ensuring that presentations remain visible even in well-lit rooms. The high contrast ratio of 5,000:1 further enhances their capability by providing deeper blacks and more vibrant colors, enabling the audience to experience rich and dynamic visuals. The native resolutions are WUXGA (1920 x 1200) for the LC-SX6A and XGA (1024 x 768) for the LC-X6A, making them suitable for projecting detailed images and text.

One of the standout technologies incorporated in these projectors is the 3LCD system, which allows them to achieve exceptional color accuracy and uniform brightness. This means that users can expect true-to-life colors in their presentations, making the visuals more engaging and effective. Furthermore, Eiki’s Intelligent Color Management technology helps adjust color settings based on the content being projected, providing optimal viewing experiences tailored to specific applications.

Connectivity is another strong suit of the Eiki LC-SX6A and LC-X6A. They come equipped with multiple input options including HDMI, VGA, USB, and more, ensuring compatibility with a wide array of devices such as laptops, tablets, and media players. This versatility makes setup and operation seamless, reducing the time needed for technical preparations.

Both projectors feature a robust design aimed at durability, making them ideal for frequent use in various environments. Additionally, they include a lamp life of up to 6,000 hours in eco mode, which significantly lowers maintenance costs and extends the intervals between replacements.

To enhance user convenience, the projectors include features like a built-in camera for real-time monitoring and wireless options for remote presentations. They also come with a comprehensive suite of image optimization settings, allowing users to fine-tune projection quality according to their specific needs.

In summary, the Eiki LC-SX6A and LC-X6A projectors deliver a perfect blend of brightness, color fidelity, and connectivity that meets the demands of modern presentations in educational and professional settings. Their innovative technologies and robust characteristics make them a valuable investment for anyone seeking reliable and high-quality projection solutions.