Eiki LC-X6A, LC-SX6A owner manual Test pattern, RS-232C, USB memory

Page 58

Special

Auto PC adj.

Select “On” to enable the Auto PC adjust function and “Off” to disable it. Refer to page 30 and 40 for Auto PC adjust function.

Test pattern

Various test patterns are prepared in this projector allowing users to test the projection. Select one from the following twenty kinds of patterns: Cross 1 (W), Cross 2 (R), Cross 3 (G), Cross 4 (B), Cross 5 (M), Cross 6 (C), Cross 7 (Y), Gradation 1~4, Color, and Flat 1~8.

To cancel the Test pattern, press the CANCEL button on the top control or the remote control.

RS-232C

This feature allows users to set serial communication configuration (baud rate and the projector ID) when connecting several projectors via the RS-232C terminal of the projector. (p13, 78)

Baud rate . . . . .9600 / 19200 Projector ID . . .001 ~ 999

Default . . . . .returns Baud rate and Projector ID to factory default setting

(Baudrate: 19200, Projector ID: 001)

USB memory

This feature allows users to store PC mode and Image adjustment data on the optional USB key connected to the projector and recall it from the USB key. PC mode data and Image adjustment data can be stored separately on respective 10 memory areas of the USB key. (PC mode data: mode 1–50 x 10, Image adjustment data: Image 1-10 x 10) (p43, 47)

Save . . . . . .stores the adjustment data on the USB key connected to the projector.

Load . . . . . . . . .recalls the stored data. Delete . . . . . . .deletes the stored data.

To use the USB memory function, the optional USB key (separately provided) is required. Refer to page 73 for the USB key information and contact the sales dealer or service station for purchasing. For further information on USB memory function, refer to the owner's manual that comes with the USB key.

Note:

USB memory function cannot be operated without our specified optional USB key. See page 73 for the optional parts.

USB memory cannot be displayed without the optional USB key connected to the projector. (p13)

Test pattern

Select Test pattern and then the Test pattern selection box is displayed. Choose one of these patterns with the Point buttons (e and d) or Control pad and press the SELECT button to display the selected pattern on screen.

Indicates the other items exist below.

RS-232C

The item selected.

USB memory

Move the pointer to one of these and then press the SELECT button and USB Memory Menu appears .

To be continued to the next page.

58

Image 58
Contents LC-SX6A Features and Design Compatibility My Menu SelectionTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Setup In Proper DirectionsPositioning Precautions Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticeFront PreparationParts Name BackIndicators Top Control Terminals Input 2 terminalsUSB USB Series BC Jack Serial Port OUTRemote Control About Control PadFreeze button Timer button4REMOTE RESET/ON/ALL-OFF switch CH buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Lens Installation InstallationInstallation Positioning the ProjectorLevel Adjustable Feet Lens Shift AdjustmentAdjustable feet For the U.S.A. and Canada Connecting AC Power CordFor Continental Europe 200 240 V ACInterface Board Slots Connection TerminalsOption Control No Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Video Equipment Digital and Video Video Cable w S-Video Cable e DVI-D CableConnecting to Video Equipment Component and RGB Scart BNC Cable Scart-VGA Cable e Component CableOperating the Projector Wireless Remote Control OperationBasic Operation Mouse OperationBasic Operation and Reference Buttons Top Control Remote ControlPad Turning On the Projector What is PIN code?Enter a PJ PIN code Turning Off the Projector Shutter Function Zoom and Focus AdjustmentRemote Control Top ControlInput Selection Auto PC AdjustmentInformation Screen Selection Keystone AdjustmentTimer Function Picture Freeze FunctionZoom + Zoom +/- FunctionZoom Top Control Operation How to Operate On-Screen MenuRemote Control Operation Mouse OperationMouse cursor Menu icon GuideControl bar for Mouse Operation Item dataMenu Icons and Their Features Menu icons What You Can Do with Each MenuInput InputRGB Scart When the input source is component When the input source is analog comingWhen video input signal is connected to Move a pointer to Input 2 and press the Select buttonPC System Selection SystemSystem AutoAV System Menu Video or S-Video Video or S-Video Signal SelectionComponent Signal Selection AV System Menu ComponentAuto PC Adjust Computer AdjustmentPC Adjustment Auto PC adjManual PC Adjust Position Sync phaseReset ModeFor PC Input Image AdjustmentImage For AV InputImage Adjust Red Auto picture controlColor temp GreenProgressive GammaNoise reduction FilmScreen Setting Screen SettingScreen Ceiling ZoomKeystone RearLanguage SettingSetting MenuLogo Enter a Logo PIN codeBackground LampDisplay Power managementPower management Input searchLens memory Analog outShutter Key lock Shutter ManagementSecurity USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuFan control SpecialSpecial FilterRS-232C Test patternUSB memory Exits Warning log menu InformationAll indicators except the Lamp indicator are blinking Maintenance and CleaningThen check the matters below Air Filter Replacement Filter cover Air filterReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Projector is OFF. The AC power cord is unplugged Indicators and Projector ConditionMain Indicators May cause electric shock or a fire hazardShutter Indicator Air filter is clogged with dust or has been used overtimeLamp 1/2 Lamp Replace IndicatorsUntil cooling is completed Troubleshooting AppendixIs switched Wireless Remote ControlLens position moves when Input Some displays are not seenCompatible Computer Specifications Freq1080i/60 1080i/50Technical Specifications Accessories Optional PartsMenu Tree Screen ScreenImage Image ADJ Special Lamp Dimensions Terminal Configurations USB Connector Series BPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Index NumericsAppendix Appendix Appendix Key to better communications Canada

LC-X6A, LC-SX6A specifications

The Eiki LC-SX6A and LC-X6A projectors are advanced devices designed for professional presentations and high-quality visual experiences. With a focus on outstanding image clarity and versatile performance, these projectors cater to a wide range of applications, from corporate meetings to educational environments.

Both models feature a powerful 6,000 ANSI lumens brightness, ensuring that presentations remain visible even in well-lit rooms. The high contrast ratio of 5,000:1 further enhances their capability by providing deeper blacks and more vibrant colors, enabling the audience to experience rich and dynamic visuals. The native resolutions are WUXGA (1920 x 1200) for the LC-SX6A and XGA (1024 x 768) for the LC-X6A, making them suitable for projecting detailed images and text.

One of the standout technologies incorporated in these projectors is the 3LCD system, which allows them to achieve exceptional color accuracy and uniform brightness. This means that users can expect true-to-life colors in their presentations, making the visuals more engaging and effective. Furthermore, Eiki’s Intelligent Color Management technology helps adjust color settings based on the content being projected, providing optimal viewing experiences tailored to specific applications.

Connectivity is another strong suit of the Eiki LC-SX6A and LC-X6A. They come equipped with multiple input options including HDMI, VGA, USB, and more, ensuring compatibility with a wide array of devices such as laptops, tablets, and media players. This versatility makes setup and operation seamless, reducing the time needed for technical preparations.

Both projectors feature a robust design aimed at durability, making them ideal for frequent use in various environments. Additionally, they include a lamp life of up to 6,000 hours in eco mode, which significantly lowers maintenance costs and extends the intervals between replacements.

To enhance user convenience, the projectors include features like a built-in camera for real-time monitoring and wireless options for remote presentations. They also come with a comprehensive suite of image optimization settings, allowing users to fine-tune projection quality according to their specific needs.

In summary, the Eiki LC-SX6A and LC-X6A projectors deliver a perfect blend of brightness, color fidelity, and connectivity that meets the demands of modern presentations in educational and professional settings. Their innovative technologies and robust characteristics make them a valuable investment for anyone seeking reliable and high-quality projection solutions.