Eiki LC-WB40N Computer Input, Input Source Selection RGB Computer 1 Analog/Computer, Input Menu

Computer Input

Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )

Direct Operation

Choose either Computer 1 (Analog) or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to either Computer 1 (Analog) or Computer 2,
	and then press the SELECT button.
3	When selecting Computer 1 (Analog), RGB input
	source will be selected directly.
	When selecting Computer 2, the Source Select Menu
	appears. Move the pointer to RGB and then press the
	SELECT button.

✔Notes:

• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation”.

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

Top Control	INPUT button
	Computer 1 (Analog)
	Computer 1 (Digital)
	Computer 2
	Video
	Wired
Remote Control	Wireless
	COMPUTER button
	Computer 1 (Analog)
	Computer 1 (Digital)
	Computer 2

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 (Analog) and press the SELECT button.

Wireless

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer

2

Move the pointer (red arrow) to RGB.

30