![](/images/new-backgrounds/1172091/17209129x1.webp)
Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.
1 | Before operating the wireless mouse, connect |
your computer and the projector with a USB | |
| cable (not supplied). See “Connecting to a |
| Computer” on page 19. When the Pointer |
| function is used, the wireless mouse is not |
| available. |
2 | When a USB cable is connected to the |
computer and the projector, turn on the | |
| projector first, then the computer. If you turn |
| on the computer first, the wireless mouse |
| function may not operate correctly. |
Remote Control Code
PRESENTATION POINTER button
Move the pointer on the screen with this button.
Acts as right (click) mouse button while the projector and a computer are connected with a USB cable.
L-CLICK button
![](/images/new-backgrounds/1172091/17209129xi5.webp)
Acts as left (click) mouse button while the projector and a computer are connected with a USB cable.
The eight different remote control codes (Code
1 | Press and hold the MENU and IMAGE buttons for |
more than five seconds to switch between the codes. | |
| The code switches sequentially for one pressing the |
2 | IMAGE button. See the list below. |
To initialize the remote control code, slide the RESET/ | |
| The initial code is set to Code 1. |
|
|
Remote Control Code | Number of Times |
Pressing IMAGE | |
| Button |
Code 1 | 1 |
Code 2 | 2 |
Code 3 | 3 |
Code 4 | 4 |
Code 5 | 5 |
Code 6 | 6 |
Code 7 | 7 |
Code 8 | 8 |
While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code.
MENU button
IMAGE button
RESET/ON/ALL-OFF
switch
15