Antitheft Alarm Function
SAFETY Precautions for SANYO Ni-MH BATTERY PACK
Observe the following precautions when handling the
●MAKE SURE THAT THE BATTERY PACK IS INSTALLED IN THE PROJECTOR WHEN RECHARGING. USING THE CHARGERS OTHER THAN THE PROJECTOR MAY CAUSE EXPLOSION OR A FIRE.
●The rechargeable battery pack is for use exclusively with this projector. Do not use in other products or this may cause accident.
●Do not throw the battery into fire or heat it. Doing so may cause an explosion or fire.
●Never attempt to disassemble, modify, reconstruct, or solder lead wires directly on to the battery.
●Do not drop or subject to strong forces. Doing so may cause the battery to leak fluid or explode.
●Do not expose to direct sunlight or high temperatures. This may degrade battery performance or cause leakage.
●Avoid contact with water or liquid. Exposure to water or liquid could result in battery corrosion or damage.
●Keep out of reach of children. They may accidentally swallow the battery.
●Do not
●The rechargeable battery pack has a limited number of charge cycles and eventually need to be replaced. If it can no longer be recharged, stop charging immediately and replace it with new one.
●Recharge the battery in a place where the temperature is always between 32˚F to 104˚F (0˚C to 40˚C). Charging in the temperature out of this range may result in fluid leak, heat generation, or shortening battery life.
●If you do not use the projector or the Antitheft alarm function for a long period of time, remove the battery from the projector and store it in a place where the temperature is always between
●If a battery leaks and fluid comes in contact with skin, this may cause skin irritation. Flush the affected area thoroughly with water.
●If a battery leaks and fluid gets in contact with eyes, wash your eyes with water immediately and seek medical attention.
●Dispose of used batteries according to your local disposal rule and guidelines.
61