Eiki LC-WB40N owner manual Maintenance and Cleaning Lamp Replacement, Reset the lamp counter

Page 65

Maintenance and Cleaning

Lamp Replacement

When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.

WARNING:

TURN OFF THE UV LAMP BEFORE 

OPENING THE LAMP COVER

Top Control

LAMP REPLACE indicator

Lamp replacement icon

Note:

The Lamp replacement icon will not appear when the Display function is set to “Off” (p.48), during “Freeze” (p.28), or “No show” (p.29).

CAUTION

CAUTION

Allow a projector to cool for at least 45 minutes

For continued safety, replace with a lamp of the

before you open the Lamp cover. The inside of the

same type. Do not drop a lamp or touch a glass

projector can become very hot.

bulb! The glass can shatter and may cause injury.

Follow these steps to replace the lamp.

1

Turn off the projector and unplug the AC power cord.

Let the projector cool for at least 45 minutes.

Press here and pull upward. Lamp Cover

2

Remove the screw and open the lamp cover.

3

Remove the two (2) screws that secure the lamp. Lift

the lamp out of the projector by using the handle.

4

Replace the lamp with a new one and secure the two

(2) screws. Make sure that the lamp is set properly.

 

Close the lamp cover and secure the screw.

5

Connect the AC power cord to the projector and turn

on the projector.

6

Reset the lamp counter..

See “Resetting the Lamp Counter” on the next page.

Handle

Screw

Screw

Screw

Lamp

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer.

Model No.. of your projector

: LC-WB40N

Replacement Lamp Type No.

: POA-LMP111

 

 

(Service Parts No. 610 333 9740)

65

Image 65
Contents Memory Viewer Network SupportedPage Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Moving the Projector Safety Instructions Air CirculationPositioning Precautions AC Power Cord for the United States and Canada AC Power Cord RequirementAC Power Cord for the United Kingdom CompliancePart Names and Functions Part Names and Functions Lamp Replace indicator Alarm indicatorPoint ed7 8 Volume +/- buttons Power indicatorE w @5 o Part Names and Functions Remote ControlPointer Function Part Names and Functions Laser Pointer FunctionSpotlight PointerRemote Control Code Part Names and Functions Wireless Mouse OperationAdjustable Feet Remote Control Operating RangePositioning the Projector InstallationFor Continental Europe For the U..K Installation Connecting the AC Power CordProjector side AC outlet side Cables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Basic Operation What is PIN code?Turning On the Projector Enter a PIN codeBasic Operation Turning Off the Projector Remote Control Basic Operation How to Operate the On-Screen MenuTop Control On-Screen MenuFor video source Basic Operation Menu BarFor computer source Keystone Correction Basic Operation Zoom and Focus AdjustmentAuto Setup Function Menu Operation Basic Operation Sound AdjustmentDirect Operation Basic Operation Remote Control Operation Basic Operation Timer buttonNo Show button Image buttonInput Menu Computer InputInput Source Selection RGB Computer 1 Analog/Computer Input Source Selection Rgbpc digital, Rgbav Hdcp Computer InputSelecting Computer System Manually Computer Input Computer System SelectionPC Adjust Menu Computer Input Auto PC AdjustmentTo store adjustment parameters Auto PC AdjComputer Input Manual PC Adjustment To store adjusted data To clear adjusted dataImage Select Menu Computer Input Image Mode SelectionImage Adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentNormal TrueCustom For zooming in and out the imagesDigital zoom + Digital zoomAuto Video InputInput Source Selection Video, S-video RGB Scart Input Source Selection Component, RGB Scart 1-pinVideo Input Video or S-Video Video Input Video System SelectionAV System Menu Video or S-Video ComponentImage1-4 Video Input Image Mode SelectionCinema Tint Video Input Image AdjustmentColor Progressive Noise reductionZoom Video Input Screen Size AdjustmentSetting SettingSetting Menu Language Auto setupDisplay KeystoneKeystoneBlue back Logo select Capture Logo Logo and Logo PIN code lock settingsLogo select CaptureChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Ceiling Ceiling RearRear Input searchPower management Standby modeTo change the code for the remote control Remote controlPointer On startKey lock Security Key lock and PIN code lock, Alarm settingsPIN code lockPIN code lock Key lockChange the PIN code lock setting Change the PIN code lock settingChange the PIN code Enter a PIN codeFan Fan Fan Control SettingFan control Lamp counterFactory default Factory defaultFilter counter Filter counterSet and release the Antitheft alarm function Antitheft Alarm FunctionHow to Use the Antitheft Alarm Function Other settings Antitheft Alarm FunctionReset the settings Alarm operating configurationReplace the rechargeable batteries How to replace the rechargeable batteriesCharge the built-in batteries SAFETY Precautions for Sanyo Ni-MH Battery Pack Then check the matters below Maintenance and CleaningProjector is shut down and the Warning indicator lights red Maintenance and Cleaning Cleaning the Projector Cabinet Maintenance and Cleaning Slide ShutterCleaning the Projection Lens Service Parts No 333 Maintenance and Cleaning Lamp ReplacementReset the lamp counter Maintenance and Cleaning Resetting the Lamp Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix Alarm does not stop ringing Remote Control doesIndicator blinks or lights Wireless Mouse function doesAppendix Computer Input/Video Input Appendix Menu TreeSound Computer InputVideo Input SettingIndicators Appendix Indicators and Projector ConditionKHz Appendix Compatible Computer SpecificationsFreq.. ON-SCREEN Appendix Technical Specifications Model No AccessoriesOptional Parts Appendix PJ Link Notice USB Connector Series B Appendix Configurations of TerminalsService Port Connector Terminal Mini DIN 8-PIN Terminal Analog RGB Mini D-sub 15 pinAppendix PIN Code Number Memo Alarm PIN Code NoPIN Code Lock No Logo PIN Code Lock NoDimensions Canada ChinaEastern Europe Japan & Worldwide