Eiki LC-WB40N owner manual Computer Input, Input Source Selection Rgbpc digital, Rgbav Hdcp

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation Top Control

Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

Wireless

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to Computer 1 (Digital), and then press the
	SELECT button.
3	After the Source Select Menu appeared for Computer
	1 (Digital), move the pointer to RGB (PC digital) or
	RGB (AV HDCP), and then press the SELECT button.

✔Notes:

• HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

• Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

• When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Input Menu icon

Input Menu

Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button.

Computer

1

Move the pointer to the source that you want to select and press the SELECT button.

31