Eiki LC-WB40N owner manual Input Source Selection Component, RGB Scart 1-pin, Video Input

Input Source Selection (Component, RGB Scart 1-pin)

Direct Operation Top Control

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Video Input

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 

Video

Wired

Wireless

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Input Menu icon.

Use the Point ed buttons to move the red arrow pointer to Computer 2 and then press the SELECT button.

After the Source Select Menu appeared for Computer 2, move the pointer to Component or RGB(Scart) and then press the SELECT button.

When the input source is coming from video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a Component-VGA Cable, select Component.

RGB (Scart)	When the input source is coming from video
	equipment connected to the COMPUTER
	IN 2/COMPONENT IN terminal with a Scart-
	VGA Cable, select RGB (Scart).

✔Note:

•Wired and Wireless are for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.51).

Remote Control

COMPUTER button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 

Input Menu Input Menu icon

Move the pointer (red arrow) to Computer 2 and press the SELECT button.

Computer



Source Select Menu Move the pointer to Component or RGB(Scart) and press the SELECT button.

41