CHAPTER 3 | AMI® BIOS USER’S GUIDE |
3.7 Peripheral Setup
1. Press <ENTER> on “Peripheral Setup” of the main menu screen.
AMIBIOS SETUP - PERIPHERAL SETUP
(C)1996 American Megatrends, Inc. All Rights Reserved
OnBoard | FDC |
|
| Enabled | ||
OnBoard | Serial | PortA | 3F8h/COM1 | |||
OnBoard | Serial | PortB | 2F8h/COM2 | |||
IR Port | Support |
|
| Disabled | ||
IR | Base | Address | Select | 2F8 | ||
IR | IRQ | Select |
|
| 10 | |
IR | DMA | Select |
|
| Disabled | |
OnBoard | Parallel | Port | 378 | |||
Parallel | Port | Mode | ECP | |||
EPP | Version |
|
| N/A | ||
Parallel | Port | IRQ | 7 | |||
Parallel | Port | DMA Channel | 3 | |||
Onboard | IDE |
|
| Both | ||
Available Options:
Enabled
Disabled
ESC:Exit :Sel
PgUp/PgDn:Modify
F2/F3:Color
2.Use <up> and <down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3.After you have finished with the Peripheral Setup, press <ESC> to go back to the main menu.