CHAPTER 2 | HARDWARE INSTALLATION |
|
|
Step 5: Install the Heat Sink with Fan to the Processor.
Push down the metal clips, so that they are in line with the back of the Heat Sink. Be careful, so as not detach the metal clips from the Heat Sink.
Heat Sink w/ Fan
Heat Sink
Base Holder
Metal Clips
âTheshouldarrowbe pointing down.
In case the metal clips are detached from the Heat Sink,
Attach the Heat Sink to the processor.
Clip Holder
Secure holes
Clip Holder
S.E.C. Cartridge - Thermal P
Isometric View
Pentium® II processor (Back)
Metal Clips Ear
Secure
Posts
Metal Clips Ear
Heat Sink w/ Fan(Back)
-Look at the back of the Heat Sink and take note of the 2 secure posts. Insert these 2 Secure posts to the 2 secure holes on the back of the processor.
-Align the ears of the metal clips with the clip holders on the back of the processor. Use a screw driver to push the metal clips onto the clip holders. Check for a perfect fit.