Intel AW-A795 user manual User’s Manual, Option, Description, Power Management

Page 34

Power Management

User’s Manual

2.Move between items and select values by using the arrow keys. Modify the selected field the PgUP/PgDN keys. For information on the various options, press <F1> key.

	Option	Description
	Power Management	Choose Disable, User Define, Min Saving or Max. Saving.
		“User Define” – Lets you specify when the HDD and
		system will shut down
		“Min Saving” - Predefine timer value of 4-12 min.
		“Max Saving” – Predefine timer value of 1 minute
	Video Off Method	Choose V/H SYNC+Blank, DPMS, Blank Screen
		When power management blanks the screen and turns off
		vertical and horizontal scanning.
		The DPMS (Display Power Management System) setting
		allows the BIOS to control the video card if it has the
		DPMS features. If you don’t have a Green monitor, use
		the Blank Screen option
	Video Off In Suspend	Choose the video off condition: NA/Suspend/Doze
	Suspend Type	Choose “Stop Grant” or “Power on Suspend”
	MODEM Use IRQ	Choose the IRQ used by the modem.
		Default: Disabled
	Suspend Mode	Sets the time for Suspend mode or disables it

©2002 AEWIN Technologies Co., Ltd.. All rights reserved.

33

Ver 1.0. Jan. 2005

Image 34

Contents Intel Pentium 4 Embedded SBC with Six Gigabit/Two 10/100LAN SSD Model Number：AW-A795User’s Manual Control BoardTrademarks Copyright 2005. All Rights Reserved Manual Edition 1.0, JanuaryLimitation of Liability 1.5 Board Dimension Table of ContentsSpecification Chapter 2. Connectors Location and Configuration3.1 Quick Setup JP3Speak Buzzer EnableChapter 3. BIOS Setup 3.2 Entering the CMOS Setup ProgramChapter 1. General Information 1.1IntroductionParallel port KB/Mouse connector USB connectors PCI Slot 1.2SpecificationCPU BIOS Chipset I/O Chipset Memory Enhanced IDE Serial port Watchdog Timer System Monitoring Digital I/OPrecautions 1.3AW-A795 Package1.4 Board Layout 1.5 Board Dimension Chapter 2. Connectors/Switch Location and Configuration USB0 Connector ConnectorDefine LAN 10/100 Connector LAN 10/100 Connector2.2. Installing Processors 2.2.1 Installing CPU 2.2.2 Remove CPU 1 First, please push the tappet to unlock location 3 Now you can take out the CPU from socket2.2.3 How to recognize CPU 1 Pentium M CPU Socket 2 PIII CPU - uFCPGA Package3 Pentium 4 CPU Socket 2.3 Installing Memory To insert a DIMM Memory To Insert a DIMM Memory Please align the module with the socket key and press down until the levers at each end of the socket snap close up User’s Manual CN4/5/6/7/8/9Gigabit LAN connector 2.4 Connector and Jumper SettingsCN1 USB0 Connector CN2/3 LAN 10/100 ConnectorCN13USB1 Pin Header Pin Define CN11/20/24/28/29/30/31FAN Connector CN12Power LED Pin HeaderPin Define CN14 COM2 Box HeaderDefine CN18 GPIO Pin Header CN25IDE 2mm 44Pin 90 degreeCN26IDE2.54mm 40 Pin Connector Setting JP1PS/On/Always On SelectJP3Speak Buzzer Enable JP2/4/5PCI-X Slot Frequency SelectJP6Clear CMOS FrequencyChapter 3. BIOS Setup 3.2Entering the CMOS Setup Program Enter the CMOS Setup program’s main menu as followsADVANCED CHIPSET FEATURES STANDARD CMOS FEATURESADVANCED BIOS FEATURES POWER MANAGEMENT SETUPSET SUPERVISORS & USER PASSWORD LOAD FAIL-SAFE DEFAULTLOAD OPTIMIZED DEFAULTS SAVE & EXIT SETUPOption Advanced BIOS Features SetupUse the Advanced BIOS Features Setup option as follows DescriptionVirus Warning Advanced Chipset Features Setup Use the Advanced Chipset Features Setup option as followsUse the Integrated Peripherals Setup option as follows to this memory area, a system error may resultUse the Power Management Setup option as follows Power Management Use the PNP/PCI Configuration Setup option as follows Option PC Health Status Configuration Setup Load Fail-Safe DefaultsLoad Optimized Defaults Supervisor/User Password Exit Without Saving Save and Exit SetupUse this function to exit Setup without saving the CMOS value Chapter 4. Driver Utility The system driver installation procedure must be performed first4.1.1. Intel 82546EB Ethernet 1 Choose Ethernet Controller 2 Choose Driver 3 Click Next 4 Click Next 5Click Next 6 Click Next 7 Click Finish Please install Ethernet drivers as follows 4.1.2 Intel 82551 Ethernet Installation2 . Select the Drivers/system file to click the Setup icon 1. Insert the AW-A795 CD-ROM driver into the CD-ROM Drive3 Click Next 4 Click Next 5 Click Next 6 Click Next 4.2.1 Install System Chipset Driver 7 Click Finish1 Click Next 2 Click Yes 3 Click Next Installation process is completed and allowed the system to reboot 4 Click FinishAssignment Appendix A System Resource Interrupt ControllerChannel Address Range Memory MapMemory below 1MB 1Mb ~ 640KB TypeUser’s Manual AW-A795 Appendix B Standard Cable ListCable Description Terminating