Intel AW-A795 user manual User’s Manual, Option, Description

Page 36
Manual background

User’s Manual

2.Move between items and select values by using the arrow keys. Modify the selected fields using the PgUP/PgDN keys. For information on the various options, please press <F1> key.

Option

 

Description

Reset Configuration Data

Choose Enable or Disable

 

“Enable” – PNP configuration data is reset in BIOS

 

“Disable” – PNP configuration date is retained in BIOS

Resources Controlled By

Choose Auto or Manual. This option specifies whether

 

resources are controlled by automatic or manual

 

configuration

 

IRQ Resources

IRQ-3 Assigned to

<PCI Device>

 

IRQ-4 Assigned to

<PCI Device>

 

IRQ-5 Assigned to

<PCI Device>

 

IRQ-7 Assigned to

<PCI Device>

 

IRQ-9 Assigned to

<PCI Device>

 

IRQ-10 Assigned to

<PCI Device>

 

IRQ-11 Assigned to

<PCI Device>

 

IRQ-12 Assigned to

<PCI Device>

 

IRQ-14 Assigned to

<PCI Device>

 

IRQ-15 Assigned to

<PCI Device>

DMA Resources

Assign DMA channel 0/1/3/5/6/7 to legacy ISA or auto by

 

default “PCI/ISA”

 

 

 

 

3.Please press the <ESC> key to return the main menu after finishing with the PNP/PCI Configuration Setup.

©2002 AEWIN Technologies Co., Ltd.. All rights reserved.

35

Ver 1.0. Jan. 2005

Image 36
Contents Model Number:AW-A795 User’s ManualIntel Pentium 4 Embedded SBC with Six Gigabit/Two 10/100LAN SSD Control BoardCopyright 2005. All Rights Reserved Manual Edition 1.0, January TrademarksLimitation of Liability Table of Contents Specification1.5 Board Dimension Chapter 2. Connectors Location and ConfigurationJP3Speak Buzzer Enable Chapter 3. BIOS Setup3.1 Quick Setup 3.2 Entering the CMOS Setup ProgramChapter 1. General Information 1.1Introduction1.2Specification CPU BIOS Chipset I/O Chipset Memory Enhanced IDE Serial portParallel port KB/Mouse connector USB connectors PCI Slot Watchdog Timer System Monitoring Digital I/OPrecautions 1.3AW-A795 Package1.4 Board Layout 1.5 Board Dimension Chapter 2. Connectors/Switch Location and Configuration Connector DefineUSB0 Connector LAN 10/100 Connector LAN 10/100 Connector2.2. Installing Processors 2.2.1 Installing CPU 2.2.2 Remove CPU 1 First, please push the tappet to unlock location 3 Now you can take out the CPU from socket2.2.3 How to recognize CPU 1 Pentium M CPU Socket 2 PIII CPU - uFCPGA Package3 Pentium 4 CPU Socket 2.3 Installing Memory To insert a DIMM Memory To Insert a DIMM Memory Please align the module with the socket key and press down until the levers at each end of the socket snap close up User’s Manual 2.4 Connector and Jumper Settings CN1 USB0 ConnectorCN4/5/6/7/8/9Gigabit LAN connector CN2/3 LAN 10/100 ConnectorCN11/20/24/28/29/30/31FAN Connector CN12Power LED Pin Header Pin DefineCN13USB1 Pin Header Pin Define CN14 COM2 Box HeaderUser’s Manual CN18 GPIO Pin Header CN25IDE 2mm 44Pin 90 degreeCN26IDE2.54mm 40 Pin Connector Setting JP1PS/On/Always On SelectJP2/4/5PCI-X Slot Frequency Select JP6Clear CMOSJP3Speak Buzzer Enable FrequencyChapter 3. BIOS Setup 3.2Entering the CMOS Setup Program Enter the CMOS Setup program’s main menu as followsSTANDARD CMOS FEATURES ADVANCED BIOS FEATURESADVANCED CHIPSET FEATURES POWER MANAGEMENT SETUPLOAD FAIL-SAFE DEFAULT LOAD OPTIMIZED DEFAULTSSET SUPERVISORS & USER PASSWORD SAVE & EXIT SETUPAdvanced BIOS Features Setup Use the Advanced BIOS Features Setup option as followsOption DescriptionVirus Warning Advanced Chipset Features Setup Use the Advanced Chipset Features Setup option as followsUse the Integrated Peripherals Setup option as follows to this memory area, a system error may resultUse the Power Management Setup option as follows Power Management Use the PNP/PCI Configuration Setup option as follows User’s Manual PC Health Status Configuration Setup Load Fail-Safe DefaultsLoad Optimized Defaults Supervisor/User Password Save and Exit Setup Exit Without SavingUse this function to exit Setup without saving the CMOS value The system driver installation procedure must be performed first Chapter 4. Driver Utility4.1.1. Intel 82546EB Ethernet 1 Choose Ethernet Controller 2 Choose Driver 3 Click Next 4 Click Next 5Click Next 6 Click Next 7 Click Finish 4.1.2 Intel 82551 Ethernet Installation 2 . Select the Drivers/system file to click the Setup iconPlease install Ethernet drivers as follows 1. Insert the AW-A795 CD-ROM driver into the CD-ROM Drive3 Click Next 4 Click Next 5 Click Next 6 Click Next 4.2.1 Install System Chipset Driver 7 Click Finish1 Click Next 2 Click Yes 3 Click Next Installation process is completed and allowed the system to reboot 4 Click FinishAppendix A System Resource Interrupt Controller AssignmentChannel Memory Map Memory below 1MB 1Mb ~ 640KBAddress Range TypeUser’s Manual Appendix B Standard Cable List Cable DescriptionAW-A795 Terminating