Intel AW-A795 1.2Specification, CPU BIOS Chipset I/O Chipset Memory Enhanced IDE Serial port

Page 6

1.2Specification

User’s Manual

1.2Specification

General Functions

CPU

BIOS

Chipset

I/O Chipset

Memory

Enhanced IDE

Serial port

Parallel port

KB/Mouse connector

USB connectors

PCI Slot

Watchdog Timer

System

Monitoring

Digital I/O

Ethernet Interface

Intel Pentium® 4 based processors with 400/533MHz Front-side Bus Award® 512KB Flash BIOS

Intel® E7501 + ICH3 + P64H2

Winbond® 83627HF

Onboard two 184-pin DDR DIMM socket, support PC2100 registered memory up to 4Gbytes

Support up to two IDE devices

Two RS-232 ports, oneRJ-45 connector and one pin header

One pin header for parallel port

5x2 header onboard support PC/AT Keyboard and PS/2 mouse

Two USB ports, one with pin header

One 64-bit PCI-X 133MHx

Can generate a system reset, Support software selectable timeout interval.

Support temperatures, fan speed and voltages monitoring

Support eight application definable LEDs

Chipset		Two Intel® 82551ER Fast Ethernet controller. Triple Intel®82546GB
Chipset		Fast Ethernet controller for Copper.
		Fast Ethernet controller for Copper.
Ethernet interface		PCI 10/100Mbps Ethernet controller, IEEE 802.3U protocol
Ethernet interface		compatible

SSD Interface		One 50-pin CompactFlash™ socket
Mechanical and Environmental

Power supply voltage				Standard ATX Power supply
Operating temperature				32 to 140℉(0 to 40℃)

Board size				11.7”(L) x 13.1”(W) , (300mmx350mm)

©2002 AEWIN Technologies Co., Ltd.. All rights reserved.

6

Ver 1.0. Jan. 2005

Image 6

Contents Intel Pentium 4 Embedded SBC with Six Gigabit/Two 10/100LAN SSD Model Number：AW-A795User’s Manual Control BoardCopyright 2005. All Rights Reserved Manual Edition 1.0, January TrademarksLimitation of Liability 1.5 Board Dimension Table of ContentsSpecification Chapter 2. Connectors Location and Configuration3.1 Quick Setup JP3Speak Buzzer EnableChapter 3. BIOS Setup 3.2 Entering the CMOS Setup ProgramChapter 1. General Information 1.1IntroductionParallel port KB/Mouse connector USB connectors PCI Slot 1.2SpecificationCPU BIOS Chipset I/O Chipset Memory Enhanced IDE Serial port Watchdog Timer System Monitoring Digital I/OPrecautions 1.3AW-A795 Package1.4 Board Layout 1.5 Board Dimension Chapter 2. Connectors/Switch Location and Configuration USB0 Connector ConnectorDefine LAN 10/100 Connector LAN 10/100 Connector2.2. Installing Processors 2.2.1 Installing CPU 2.2.2 Remove CPU 1 First, please push the tappet to unlock location 3 Now you can take out the CPU from socket2.2.3 How to recognize CPU 1 Pentium M CPU Socket 2 PIII CPU - uFCPGA Package3 Pentium 4 CPU Socket 2.3 Installing Memory To insert a DIMM Memory To Insert a DIMM Memory Please align the module with the socket key and press down until the levers at each end of the socket snap close up User’s Manual CN4/5/6/7/8/9Gigabit LAN connector 2.4 Connector and Jumper SettingsCN1 USB0 Connector CN2/3 LAN 10/100 ConnectorCN13USB1 Pin Header Pin Define CN11/20/24/28/29/30/31FAN Connector CN12Power LED Pin HeaderPin Define CN14 COM2 Box HeaderDefine CN18 GPIO Pin Header CN25IDE 2mm 44Pin 90 degreeCN26IDE2.54mm 40 Pin Connector Setting JP1PS/On/Always On SelectJP3Speak Buzzer Enable JP2/4/5PCI-X Slot Frequency SelectJP6Clear CMOS FrequencyChapter 3. BIOS Setup 3.2Entering the CMOS Setup Program Enter the CMOS Setup program’s main menu as followsADVANCED CHIPSET FEATURES STANDARD CMOS FEATURESADVANCED BIOS FEATURES POWER MANAGEMENT SETUPSET SUPERVISORS & USER PASSWORD LOAD FAIL-SAFE DEFAULTLOAD OPTIMIZED DEFAULTS SAVE & EXIT SETUPOption Advanced BIOS Features SetupUse the Advanced BIOS Features Setup option as follows DescriptionVirus Warning Advanced Chipset Features Setup Use the Advanced Chipset Features Setup option as followsUse the Integrated Peripherals Setup option as follows to this memory area, a system error may resultUse the Power Management Setup option as follows Power Management Use the PNP/PCI Configuration Setup option as follows User’s Manual PC Health Status Configuration Setup Load Fail-Safe DefaultsLoad Optimized Defaults Supervisor/User Password Save and Exit Setup Exit Without SavingUse this function to exit Setup without saving the CMOS value The system driver installation procedure must be performed first Chapter 4. Driver Utility4.1.1. Intel 82546EB Ethernet 1 Choose Ethernet Controller 2 Choose Driver 3 Click Next 4 Click Next 5Click Next 6 Click Next 7 Click Finish Please install Ethernet drivers as follows 4.1.2 Intel 82551 Ethernet Installation2 . Select the Drivers/system file to click the Setup icon 1. Insert the AW-A795 CD-ROM driver into the CD-ROM Drive3 Click Next 4 Click Next 5 Click Next 6 Click Next 4.2.1 Install System Chipset Driver 7 Click Finish1 Click Next 2 Click Yes 3 Click Next Installation process is completed and allowed the system to reboot 4 Click FinishAppendix A System Resource Interrupt Controller AssignmentChannel Address Range Memory MapMemory below 1MB 1Mb ~ 640KB TypeUser’s Manual AW-A795 Appendix B Standard Cable ListCable Description Terminating