Intel AW-A795 user manual Supervisor/User Password, User’s Manual

User’s Manual

Supervisor/User Password

The password options let you prevent unauthorized system boot-up or unauthorized use of CMOS setup. The Supervisor Password allows both system and CMOS Setup program access; the User Password allows access to the system and the CMOS Setup Utility main menu.

The password functions are disabled by default. You can use these options to enable a password function or, if a password function is already enabled, change the password.

To change a password, first choose a password option from the main menu and enter the current password. Then type your new password at the prompt. The password is case sensitive and you can use up to 8 alphanumeric characters. Press <Enter> after entering the password. At the Next Prompt, confirm the new password by typing it and pressing <Enter> again.

Phoenix - AwardBIOS CMOS Setup Utilities

Standard CMOS Features			Frequency/Voltage Control
Advanced BIOS Features			Load Fail-Safe Default
Advanced Chipset Features			Load Optimized Defaults
Integrated Pheripherals			Set Password
Power Management	Setup		Save and Exit	Setup
PnP/PCI Configuration		Enter Password:		Saving
			Exit Without
PC Health Status
Esc : Quit			: Select Item
F10 : Save & Exit Setup

Time, Date, Hard Disk Type...

After you use this option to enable a password function, use the “Security Option” in “BIOS Feature Setup” to specify whether a password is required every time the system boots or only when an attempt is made to enter the CMOS Setup program.

©2002 AEWIN Technologies Co., Ltd.. All rights reserved. 38 Ver 1.0. Jan. 2005