Intel user manual 1.3AW-A795 Package, Precautions, User’s Manual

Page 7

1.3AW-A795 Package

User’s Manual

1.3AW-A795 Package

Please make sure that the following items have been included in the package before installation.

1. AW-A795 Low Power Embedded SBC

2. Quick Setup

3. Cable: Please refer to Appendix B Optional Cables

4. CD-ROM which contains the following folders:

(1)Manual

(2)System Driver

(3)Ethernet Driver

(4)Tools

If any of these items are missing or damaged, please contact your dealer from whom you purchased the board at once. Save the shipping materials and carton in the event that you want to ship or store the board in the future. After you unpack the board, inspect it to assure an intact shipment. Do not apply power to the board if it appears to have been damaged.

Leave the board in its original packing until you are ready to install

Precautions

Please make sure you properly ground yourself before handling the AW-A795 board or other system components. Electrostatic discharge can be easily damage the AW-A795 board.

Do not remove the anti-static packing until you are ready to install the AW-A795 board.

Ground yourself before removing any system component from it protective anti-static packaging. To ground yourself, grasp the expansion slot covers or other unpainted parts of the computer chassis.

Handle the AW-A795 board by its edges and avoid touching its component.

©2002 AEWIN Technologies Co., Ltd.. All rights reserved.

7

Ver 1.0. Jan. 2005

Image 7

Contents Control Board Model Number：AW-A795User’s Manual Intel Pentium 4 Embedded SBC with Six Gigabit/Two 10/100LAN SSDTrademarks Copyright 2005. All Rights Reserved Manual Edition 1.0, JanuaryLimitation of Liability Chapter 2. Connectors Location and Configuration Table of ContentsSpecification 1.5 Board Dimension3.2 Entering the CMOS Setup Program JP3Speak Buzzer EnableChapter 3. BIOS Setup 3.1 Quick Setup1.1Introduction Chapter 1. General InformationWatchdog Timer System Monitoring Digital I/O 1.2SpecificationCPU BIOS Chipset I/O Chipset Memory Enhanced IDE Serial port Parallel port KB/Mouse connector USB connectors PCI Slot1.3AW-A795 Package Precautions1.4 Board Layout 1.5 Board Dimension Chapter 2. Connectors/Switch Location and Configuration LAN 10/100 Connector LAN 10/100 Connector ConnectorDefine USB0 Connector2.2. Installing Processors 2.2.1 Installing CPU 3 Now you can take out the CPU from socket 2.2.2 Remove CPU 1 First, please push the tappet to unlock location1 Pentium M CPU Socket 2 PIII CPU - uFCPGA Package 2.2.3 How to recognize CPU3 Pentium 4 CPU Socket 2.3 Installing Memory To insert a DIMM Memory To Insert a DIMM Memory Please align the module with the socket key and press down until the levers at each end of the socket snap close up Ver 1.0. Jan CN2/3 LAN 10/100 Connector 2.4 Connector and Jumper SettingsCN1 USB0 Connector CN4/5/6/7/8/9Gigabit LAN connectorCN14 COM2 Box Header CN11/20/24/28/29/30/31FAN Connector CN12Power LED Pin HeaderPin Define CN13USB1 Pin Header Pin DefineDefine CN25IDE 2mm 44Pin 90 degree CN18 GPIO Pin HeaderCN26IDE2.54mm 40 Pin Connector JP1PS/On/Always On Select SettingFrequency JP2/4/5PCI-X Slot Frequency SelectJP6Clear CMOS JP3Speak Buzzer EnableChapter 3. BIOS Setup Enter the CMOS Setup program’s main menu as follows 3.2Entering the CMOS Setup ProgramPOWER MANAGEMENT SETUP STANDARD CMOS FEATURESADVANCED BIOS FEATURES ADVANCED CHIPSET FEATURESSAVE & EXIT SETUP LOAD FAIL-SAFE DEFAULTLOAD OPTIMIZED DEFAULTS SET SUPERVISORS & USER PASSWORDDescription Advanced BIOS Features SetupUse the Advanced BIOS Features Setup option as follows OptionVirus Warning Use the Advanced Chipset Features Setup option as follows Advanced Chipset Features Setupto this memory area, a system error may result Use the Integrated Peripherals Setup option as followsUse the Power Management Setup option as follows Power Management Use the PNP/PCI Configuration Setup option as follows Option Load Fail-Safe Defaults PC Health Status Configuration SetupLoad Optimized Defaults Supervisor/User Password Exit Without Saving Save and Exit SetupUse this function to exit Setup without saving the CMOS value Chapter 4. Driver Utility The system driver installation procedure must be performed first4.1.1. Intel 82546EB Ethernet 1 Choose Ethernet Controller 2 Choose Driver 3 Click Next 4 Click Next 5Click Next 6 Click Next 7 Click Finish 1. Insert the AW-A795 CD-ROM driver into the CD-ROM Drive 4.1.2 Intel 82551 Ethernet Installation2 . Select the Drivers/system file to click the Setup icon Please install Ethernet drivers as follows3 Click Next 4 Click Next 5 Click Next 6 Click Next 7 Click Finish 4.2.1 Install System Chipset Driver1 Click Next 2 Click Yes 3 Click Next 4 Click Finish Installation process is completed and allowed the system to rebootAssignment Appendix A System Resource Interrupt ControllerChannel Type Memory MapMemory below 1MB 1Mb ~ 640KB Address RangeUser’s Manual Terminating Appendix B Standard Cable ListCable Description AW-A795