Primary/Secondary IDE Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the master or slave to be configured.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
There are four IDE submenus: primary master, primary slave, secondary master, and secondary slave. Table 23 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 23. Primary/Secondary IDE Master/Slave Submenus
Feature | Options | Description | ||
|
|
| ||
Drive Installed | No options | Displays the type of drive installed. | ||
|
|
|
| |
Type | • | None | Specifies the IDE configuration mode for IDE devices. | |
| • | User | User allows capabilities to be changed. | |
| • | Auto (default) | Auto | |
| • |
|
| |
| • | ATAPI Removable |
| |
| • | Other ATAPI |
| |
| • | IDE Removable |
| |
|
|
| ||
Maximum Capacity | No options | Displays the capacity of the drive. | ||
|
|
|
| |
• | Disabled | Specifies number of sectors per block for transfers from | ||
(This feature is present | • | 2 Sectors | the hard disk drive to memory. | |
only when Type is not | • | 4 Sectors | Check the hard disk drive’s specifications for optimum | |
set to Auto.) | setting. | |||
• | 8 Sectors | |||
|
| |||
| • | 16 Sectors (default) |
| |
|
|
|
| |
continued
70 | Intel Server Board |