Intel S845WD1-E manual Nvram / Cmos / Password

Page 83

Table 37. BIOS Error Messages (continued)

Error Message

Explanation

 

 

Memory Size Decreased

Memory size has decreased since the last boot. If no memory was

 

removed, then memory may be bad.

 

 

Memory Size Increased

Memory size has increased since the last boot. If no memory was

 

added, there may be a problem with the system.

 

 

Memory Size Changed

Memory size has changed since the last boot. If no memory was

 

added or removed, then memory may be bad.

 

 

No Boot Device Available

System did not find a device to boot.

 

 

Off Board Parity Error

A parity error occurred on an off-board card. This error is followed

 

by an address.

 

 

On Board Parity Error

A parity error occurred in onboard memory. This error is followed

 

by an address.

 

 

Parity Error

A parity error occurred in onboard memory at an unknown

 

address.

 

 

NVRAM / CMOS / PASSWORD

NVRAM, CMOS, and passwords have been cleared. The system

cleared by Jumper

should be powered down and the jumper removed.

 

 

<CTRL_N> Pressed

CMOS is ignored and NVRAM is cleared. User must enter Setup.

 

 

Solving BIOS Problems

83

Image 83
Contents Intel Server Board S845WD1-E Product Guide Disclaimer Contents Configuration Software and Utilities Server Board Installation and UpgradingSolving Bios Problems Tables Regulatory and Integration InformationContents Vii Viii Feature Description Server Board FeaturesServer Board Features Back Panel Connectors Back Panel ConnectorsHDD LED Front Panel ConnectorsServer Board Components Server Board Connector and Component LocationsSupported Processors Supported Memory ConfigurationsProcessors MemoryIntel 82845E Memory Controller Hub MCH Intel 845E ChipsetIntel 82802AB Firmware Hub FWH ControllerIntel 82801BA I/O Controller Hub ICH2 Diskette Drive Controller Hardware Management SubsystemSerial Ports Parallel PortChassis Intrusion and Detection Real-Time Clock, Cmos SRAM, and BatteryHardware Management Asic Fan MonitoringLegacy USB Support IDE Interfaces Scsi Hard Drive Activity LED ConnectorIDE Support PCI IDE Support PCI Auto ConfigurationCustom Splash Screen Bios UpdatesLanguage Support Recovering Bios Data Booting Without Attached Devices Boot OptionsCD-ROM and Network Boot Intel Rapid Bios Boot Fast Booting Systems with Intel Rapid Bios BootSupervisor and User Password Functions Bios Security PasswordsSmbios System Management Bios SmbiosWake on Ring Power Management FeaturesWake on LAN Technology Resume on Ring AcpiPower States and Targeted System Power System States and Power StatesEffects of Pressing the Power Switch Wake-up Devices and Events Wake-up Devices and EventsHardware Support Connector Description Power ConnectorFan Connectors Fan Connector Function/OperationInstantly Available PC Technology Location of the Standby Power Indicator LEDPME# Wake-up Support Wake from USBWake from PS/2 Devices 32-bit, 33-MHz PCI Subsystem PCI Bus CharacteristicsPCI Bus Configuration IDs PCI I/O SubsystemPCI Arbitration ATA-100Video Modes 3D Mode Refresh Rate HzVideo Mode Support with Z Buffer Enabled Video ControllerVideo Memory Interface NIC Connector and Status LEDsNetwork Interface Controller NIC Hardware Monitoring Intel Server Board S845WD1-E Product Guide Emissions Disclaimer Tools and Supplies NeededBefore You Begin Intel Server Board S845WD1-E Product Guide Memory Dimm Installation GuidelinesInstalling DIMMs Dimm Socket Locations Removing DIMMsO Shield Dimensions Installing the I/O ShieldLocation of the Mounting Screw Holes Installing the Server BoardInstalling the Processor in the Processor Socket Installing a ProcessorAttaching the Fan Heat Sink Clips to the Processor Socket Removing the Processor Précaution Replacing the BatteryVaro Removing the Battery Connecting the IDE Cable Connecting the IDE CableFunction/Mode Jumper Setting Configuration Setting the Bios Configuration JumperJumper Settings for the Bios Setup Program Modes Preparing for the Update Updating the Bios with the Intel Express Bios Update UtilityCreating Bootable Media Obtaining the Bios Update FileRecording the Current Bios Settings Creating a Bios Update Media Creating a Bootable DisketteUpdating the Bios Recovering the Bios Bios Setup Program Modes Using the Setup ProgramBios Setup Program Function Key Description Maintenance MenuBios Setup Program Function Keys Maintenance MenuUswc Extended Configuration SubmenuExtended Configuration Submenu Ioapic Main MenuMain Menu ECCAdvanced Menu Advanced MenuPCI Configuration Submenu PCI Configuration SubmenuBoot Configuration Submenu Boot Configuration SubmenuIRQ Peripheral Configuration SubmenuPeripheral Configuration Submenu Enabled Default Auto defaultDefault IRQ 7 defaultIDE Configuration Submenu IDE Configuration SubmenuCD-ROM Primary/Secondary IDE Master/Slave SubmenusDiskette Configuration Submenu Diskette Configuration SubmenuEvent Log Configuration Submenu Event Log Configuration SubmenuPCI Video Configuration SubmenuVideo Configuration Submenu Security Menu Security MenuAcpi Submenu Power MenuPower Menu Acpi SubmenuBoot Menu Boot MenuAtapi CD-ROM Boot Device Priority SubmenuBoot Device Priority Submenu Removable Devices Submenu Hard Disk Drives SubmenuRemovable Devices Submenu Hard Disk Drives SubmenuExit Menu Exit MenuAtapi Cdrom Drives Submenu Atapi Cdrom Drives SubmenuIntel Server Board S845WD1-E Product Guide Number of Beeps Description Bios Beep CodesBeep Codes Error Message Explanation Bios Error MessagesBios Error Messages Nvram / Cmos / Password Intel Server Board S845WD1-E Product Guide Japan World Wide Web TelephoneU.S. and Canada Europe Asia-Pacific regionIntel Server Board S845WD1-E Product Guide Power and Hardware Control Connectors Server Board ConnectorsBaseboard Connectors Add-in Board and Peripheral Interface Connectors Add-In Board and Peripheral Interface ConnectorsSystem Memory Map Server Board ResourcesMemory Map DMA ChannelsAddress hex Size Description MapO Map Address hex Description InterruptsInterrupts Onboard mouse port if present, else user available Product EMC Compliance Product Safety ComplianceProduct Regulatory Compliance Product Certification Markings Electromagnetic Compatibility NoticesProduct Regulatory Compliance Markings Taiwan Declaration of Conformity Europe CE Declaration of ConformityAustralia / New Zealand Installation PrecautionsKorean RRL Compliance Use Only for Intended Applications Installation RequirementsPrevent Power Supply Overload Place Battery MarkingIntel Server Board S845WD1-E Product Guide