Intel S845WD1-E manual Installation Precautions, Korean RRL Compliance, Australia / New Zealand

Korean RRL Compliance

This product has been tested and complies with MIC Notices No. 1997-41 and 1997-42. The product has been marked with the MIC logo to illustrate compliance.

The English translation for the above is as follows:

1.Type of Equipment (Model Name): S845WD1-E

2.Certification No.: Contact Intel Representative

3.Name of Certification Recipient: Intel

4.Date of Manufacturer: Marked on Product

5.Manufacturer / Nation : Intel

Australia / New Zealand

This product has been tested and complies with AS/NZS 3548. The product has been marked with the C-Tick mark to illustrate compliance.

Installation Precautions

When you install and test the server board, observe all warnings and cautions in the installation instructions.

To avoid injury, be careful of:

•Sharp pins on connectors

•Sharp pins on printed circuit assemblies

•Rough edges and sharp corners on the chassis

•Hot components (like processors, voltage regulators, and heat sinks)

•Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing to qualified technical personnel.

96 Intel Server Board S845WD1-E Product Guide