Intel SQ599 Entering Setup, Control Key, To Enter Setup Before Boot Press CTRL-ALT-ESC or DEL KEY

Page 10

SQ599

SECTION 4 BIOS SETUP

4-1 Entering Setup

Power on the computer and press <Del> immediately will allow you to enter Setup. The other way to enter Setup is to power on the computer, when the below message appears briefly at the bottom of the screen during the POST (Power On Self Test), press <Del> key or simultaneously press <Ctrl>, <Alt>, and <Esc> Keys.

TO ENTER SETUP BEFORE BOOT PRESS <CTRL-ALT-ESC> OR <DEL> KEY

If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to,

PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP

4-2 Control Key

Up arrow

Move to previous item

Down arrow

Move to next item

Left arrow

Move to the item in the left hand

Right arrow

Move to the item in the right hand

Esc key

Main Menu -- Quit and not save changes into CMOS

 

Status Page Setup Menu and Option Page Setup Menu

 

- Exit current page and return to Main Menu

PgUp / “+” key

Increase the numeric value or make changes

PgDn / “−“ key

Decrease the numeric value or make changes

F1 key

General help, only for Status Page Setup Menu and Option

 

Page Setup Menu

(Shift)F2 key

Change color from total 16 colors. F2 to select color

 

forward, (Shift) F2 to select color backward

F3 key

Reserved

F4 key

Reserved

10

Image 10
Contents Table of Contents SVGAUTL.EXE How To Use This Manual OverviewBios Product SpecificationCPU Board Layout Memory Configuration Jumper SettingsEpom Bios Other Jumper SettingDefault Flash BiosSystem Setup PCI Device Setup Press F1 to CONTINUE, CTRL-ALT-ESC or DEL to Enter Setup Entering SetupTo Enter Setup Before Boot Press CTRL-ALT-ESC or DEL KEY Control KeyMain Manual Main MenualVGA Memory setup Standard Cmos setupBios Features setup Power Management setupStandard Cmos Setup Sector ModeTime DateDrive C type/Drive D type Drive a type/Drive B type EGA/VGA Error haltVideo MonoBios Feature Setup Virus WarningBoot Sequence Quick Power On Self TestCPU Internal Cache/External Cache IDE HDD Block Mode Boot Up Floppy SeekBoot Up NumLock Status Gate A20 OptionSQ599 Typematic Rate Chars/Sec Typematic Rate SettingTypematic Delay Msec Security OptionVideo Bios Shadow System Bios ShadowC8000 Cffff Shadow/E8000 Effff Shadow VGA Memory Setup VGA memory setup will appear on your screen like thisPower Management Setup Power ManagementSYN DpmsSuspend SQ599 SQ599 PCI Configuration Setup SLOT1 AutoPCI-AUTO PCIPassword Setting Password Disabled IDE HDD Auto DetectionError Messages Power-On BootBios Reference Post Message Cmos Battery has FailedCmos Checksum Error Display Switch is SET IncorrectlyDOS Utility SiS 6205 VGA FeatureInstall Program INSTDRV.EXE \instdrv EnterSVGAUTL.EXE Video Mode Table F3 Set frame rate to be n3 HzStandard Mode Mode Display Colors Frame Video Size Shades Rate Sync FreqEnhanced Mode SQ599 Page 2 OS/2 Windows SetupPower Saving Setup in Windows DefineKeySISINST.CMD OthersSET DSPADI=\ADI42\RCPSIS.EXP Enter Autodesk ADI 4.2 -Protected Mode Driver FilesAutoCAD R11 Setup ACADR11 EnterDEL C\ACADR12\ACAD.CFG RCPSIS.EXPCopy C\ADI42\RCPSIS.EXP C\ACADR12\DRV SET DSPADI=\ADI42\RCPSIS.EXPSET RCPADI=C\ADI42\RCPSIS.EXP SET RDPADI=C\ADI42\RCPSIS.EXP 3D Studio Version 3.0 Setup3DS Vibcgf Enter to configure your display environment EnterWordPerfect Graphic Mode ResolutionText Mode Resolution \3DS3\3DS EnterGEMDRV.1 GEMDRV.2 WordPerfect SetupGEM 3.0 / Ventura SDFSIS86.VGAPSIS1K.REX PcadPSIS800.REX PSIS12.REXAre you sure Y/N ? appears on the screen, keyin Enter VersaCAD/386 SetupVersaCAD/386 VCAD.1 VCAD.EORSIS1K.DRV OrCAD RelORSIS86.DRV ORSIS12.DRVOrCAD SDT.CFG Setup Lotus Lotus 1-2-3 Setup\123install Enter LOTUS.1 LOTUS.2 LOTUS.3 LOTUS.4Windows Sistag SISV.SYS SISV256.DLL SISV.DLL OEMSETUP.INFWindows NT SIS205.INF SIS205.DRV SISMINI.VXDSQ599