Intel SQ599 manual Typematic Rate Setting, Typematic Rate Chars/Sec, Typematic Delay Msec

Page 21

SQ599

Typematic Rate Setting

This determines the typematic rate.

Enabled

Enable typematic rate and typematic delay programming

Disabled

Disable typematic rate and typematic delay programming.

 

The system BIOS will use default value of these 2 items and

 

the default is controlled by keyboard.

Typematic Rate (Chars/Sec)

6

8

10

12

15

20

24

30

6 characters per second

8 characters per second

10 characters per second

12 characters per second

15 characters per second

20 characters per second

24 characters per second

30 characters per second

Typematic Delay (Msec)

When holding a key, the time between the first and second character displayed.

250

250 msec

500

500 msec

750

750 msec

1000

1000 msec

Security Option

This category allows you to limit access to the system and Setup, or just to Setup.

System

The system will not boot and access. Setup will deny if the correct

 

password does not enter at the prompt.

Setup

The system will boot, but access to Setup will deny if the correct

 

password does not enter at the prompt.

21

Image 21
Contents Table of Contents SVGAUTL.EXE Overview How To Use This ManualProduct Specification BiosCPU Board Layout Jumper Settings Memory ConfigurationDefault Other Jumper SettingEpom Bios Flash BiosSystem Setup PCI Device Setup To Enter Setup Before Boot Press CTRL-ALT-ESC or DEL KEY Entering SetupPress F1 to CONTINUE, CTRL-ALT-ESC or DEL to Enter Setup Control KeyMain Menual Main ManualBios Features setup Standard Cmos setupVGA Memory setup Power Management setupSector Mode Standard Cmos SetupDate TimeDrive C type/Drive D type Drive a type/Drive B type Video Error haltEGA/VGA MonoVirus Warning Bios Feature SetupQuick Power On Self Test Boot SequenceCPU Internal Cache/External Cache Boot Up NumLock Status Boot Up Floppy SeekIDE HDD Block Mode Gate A20 OptionSQ599 Typematic Delay Msec Typematic Rate SettingTypematic Rate Chars/Sec Security OptionSystem Bios Shadow Video Bios ShadowC8000 Cffff Shadow/E8000 Effff Shadow VGA memory setup will appear on your screen like this VGA Memory SetupPower Management Power Management SetupDpms SYNSuspend SQ599 SQ599 PCI Configuration Setup PCI-AUTO AutoSLOT1 PCIPassword Setting IDE HDD Auto Detection Password DisabledBios Reference Post Message Power-On BootError Messages Cmos Battery has FailedDisplay Switch is SET Incorrectly Cmos Checksum ErrorInstall Program INSTDRV.EXE SiS 6205 VGA FeatureDOS Utility \instdrv EnterSVGAUTL.EXE F3 Set frame rate to be n3 Hz Video Mode TableMode Display Colors Frame Video Size Shades Rate Sync Freq Standard ModeEnhanced Mode SQ599 Page Power Saving Setup in Windows Windows Setup2 OS/2 DefineKeyOthers SISINST.CMDAutoCAD R11 Setup Autodesk ADI 4.2 -Protected Mode Driver FilesSET DSPADI=\ADI42\RCPSIS.EXP Enter ACADR11 EnterCopy C\ADI42\RCPSIS.EXP C\ACADR12\DRV RCPSIS.EXPDEL C\ACADR12\ACAD.CFG SET DSPADI=\ADI42\RCPSIS.EXP3DS Vibcgf Enter to configure your display environment 3D Studio Version 3.0 SetupSET RCPADI=C\ADI42\RCPSIS.EXP SET RDPADI=C\ADI42\RCPSIS.EXP EnterText Mode Resolution Graphic Mode ResolutionWordPerfect \3DS3\3DS EnterGEM 3.0 / Ventura WordPerfect SetupGEMDRV.1 GEMDRV.2 SDFSIS86.VGAPSIS800.REX PcadPSIS1K.REX PSIS12.REXVersaCAD/386 VersaCAD/386 SetupAre you sure Y/N ? appears on the screen, keyin Enter VCAD.1 VCAD.EORSIS86.DRV OrCAD RelORSIS1K.DRV ORSIS12.DRVOrCAD SDT.CFG Setup \123install Enter Lotus 1-2-3 SetupLotus LOTUS.1 LOTUS.2 LOTUS.3 LOTUS.4Windows NT Sistag SISV.SYS SISV256.DLL SISV.DLL OEMSETUP.INFWindows SIS205.INF SIS205.DRV SISMINI.VXDSQ599