SQ599
Video
The category selects the type of adapter used for the primary system monitor that must match your video display card and monitor. Although secondary monitors supported, you do not have to select the type in Setup.
You have two ways to boot up the system:
1.When VGA as primary and monochrome as secondary, the selection of the video type is “VGA Mode”.
2.When monochrome as primary and VGA as secondary, the selection of the video type is “Monochrome Mode”.
EGA/VGA | Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, |
| SEGA, or PGA monitor adapters. |
CGA 40 | Color Graphics Adapter, power up in 40 column mode |
CGA 80 | Color Graphics Adapter, power up in 80 column mode |
MONO | Monochrome adapter, includes high resolution monochrome adapters |
Error halt
The category determines whether the computer will stop if an error is detected during power up.
No errors | Whenever the BIOS detects a |
| stop and you will prompt. |
All errors | The system boot will not stop for any error that may detect. |
All, But Keyboard | The system boot will not stop for a keyboard error; it will |
| stop for all other errors. |
All, But Diskette | The system boot will not stop for a disk error; it will stop for |
| all other errors. |
All, But Disk/Key | The system boot will not stop for a keyboard or disk error; it |
| will stop for all other errors. |
Memory
The category is
Base Memory The POST of the BIOS conventional) memory installed in the system.
will determine the amount of base (or The value of the base memory is typically
16