Intel SQ599 manual Autodesk ADI 4.2 -Protected Mode Driver Files, AutoCAD R11 Setup, ACADR11 Enter

SQ599

1024x768	256-colors
1280x1024	256-colors (only suits for 2MB.)
640x480	64K-colors
800x600	64K-colors
1024x768	64K-colors (only suits for 2MB.)

12.If you want to change resolution, run system icon of System Setup Group in PM, highlight the resolution you want to use and quit, shut down the system and restart again.

5-5-3 Autodesk ADI 4.2 -Protected Mode

Driver Files

The enclosed SiS 6205 ADI driver contains the following file:

RCPSIS.EXP SiS ADI Driver (for all resolutions & colors) Note: This version of ADI driver does not support 16-color operation.

This driver fits for a series of Autodesk Inc. products including:

(1)AutoCAD/386 R11

(2)AutoCAD/386 R12

(3)AutoShade/386 V2.0

(4)3D Studio V3.0

Their installtion procedures are different from one program to the others. But the first step of installation is the same for all these programs, that is "To unpack and copy drivers to where you would like them to reside."

Therefore, we will state this step below.

AutoCAD R11 Setup

1.The following procedures assume that

(1)You have complete "unpack & copy" procedure.

(2)Your ADI 4.2 drivers are located in C:\ADI42.

2.Add the following setting to your own batch file for AutoCAD R11 (say ACADR11.BAT) or to your "AUTOEXEC.BAT" file:

SET DSPADI=\ADI42\RCPSIS.EXP <Enter>

3.Delete the configure file ACAD.CFG resides in \ACAD directory.

4.Type

ACADR11 <Enter>

to configure your AutoCAD R11 system.

5.In "Select Display Device:" item, choose "ADI P386 V4.0/4.1 display.".

6.In "Select Display Resolution" screen, choose which display driver you want to use.

44