Intel GA-8IPE1000 user manual Power Management Setup, PME Event Wake Up, ModemRingOn

2-4	Power Management Setup
			CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
				Power Management Setup
	ACPI Suspend Type			[S1(POS)]		Item Help
	Power LED in S1 state			[Blinking]		Menu Level`
	Off by Power button			[Instant-Off]
	AC BACK Function			[Soft-Off]
	PME Event Wake Up			[Enabled]
	ModemRingOn			[Enabled]
	Resume by Alarm			[Disabled]
x	Date (of Month) Alarm			Everday
x	Time (hh:mm:ss) Alarm			0 : 0 : 0
	POWER ON Function			[Disabled]
KLJI: Move		Enter: Select		+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values			F6: Fail-Save Defaults		F7: Optimized Defaults
	ACPI Suspend Type
	S1(POS)		Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
	S3(STR)		Set ACPI suspend type to S3/STR(Suspend To RAM).
	Power LED in S1 state
	Blinking		In standby mode(S1), power LED will blink. (Default value)
	Dual/Off		In standby mode(S1):
			a. If use single color LED, power LED will turn off.
			b. If use dual color LED, power LED will turn to another color.
	Off by Power button
	Instant-off		Press power button then Power off instantly. (Default value)
	Delay 4 Sec.		Press power button 4 seconds to Power off. Enter suspend if button is pressed less
			than 4 seconds.
	AC BACK Function
	Soft-Off		When AC-power back to the system, the system will be in "Off" state. (Default value)
	Full-On		When AC-power back to the system, the system always in "On" state.
	Memory		When AC-power back to the system, the system will return to the Last state before
			AC-power off.

PME Event Wake Up

This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.

Disabled	Disable this function.
Enabled	Enable PME as wake up event. (Default value)

ModemRingOn

An incoming call via modem can awake the system from any suspend state.

Disabled	Disable Modem Ring On function.
Enabled	Enable Modem Ring On function. (Default value)

English

- 39 - BIOS Setup