Intel 80C186EB, 80L188EC, 80L186EB, 80L186EC, 80C188EB Memory Configuration, Sram, F000FFFF, Lcd I/O

HARDWARE OVERVIEW

3.3MEMORY CONFIGURATION

The memory on the evaluation board can be divided into three types: Flash, SRAM, and expansion. Flash memory contains the Flash loader utility, located in the boot block boundary, and the RISM monitor program, beginning at F800:0000. Users can execute their test code from boot-up using the Flash loader utility. Refer to the CQI Flash Loader Reference Manual for instructions on programming the Flash memory. SRAM memory is used for the processor interrupt vector table, stack allocation, and RISM data variables, and as a possible destination for user-written code downloaded on the host interface. Expansion memory can be accessed through the expansion interface, if required.

Table 3-2 shows the logical memory map and Figure 3-1 shows the physical memory map of the evaluation board.

Table 3-2. Logical Memory Map

Memory Area	Start (H)	Stop (H)	Size
SRAM	0000:0000	2000:0000	128 Kbytes
Flash	8000:0000	F000:FFFF	512 Kbytes
Flash Boot Block	FC00:0000	F000:FFFF	16 Kbytes
Expansion	4000:0000	8000:0000	256 Kbytes
LCD (I/O)	0000:0400	0000:0440	64 bytes

3-3

3