Konica Minolta IV instruction manual Using the APS Adapter AD-10 sold separately

Using the APS Adapter AD-10 (sold separately)

APS (Advanced Photo System) cassette film can be scanned using the APS Adapter AD-10. The cassette must contain processed film; the square number 4 mark at the end of the cassette should be highlighted in white. Do not load unprocessed film.

To load an APS cassette, slide the film-	1	2
chamber release (1) toward the top of

the adapter unit until the chamber door opens (2). The film-chamber release will not return to its original position until the door is closed.

Insert the cassette into the film chamber as shown (3). Close the chamber door (4); the film-chamber release will return to its original position (5).

When the indicator lamp glows steadily, open the front door until the top of the door is aligned with the APS film-holder mark.

With the scanner contacts face up, insert the adapter into the scanner until it stops. The scanner detects the holder and automatically loads the film. Do not remove the holder until the film has been rewound, see page 21.

4

3

5

When using the APS adapter, if the scanner makes a strange sound or the film- advance warning appears, eject the APS adapter immediately (p. 21) and do not reinsert it. Contact a Konica Minolta service facility.

20 LOADING THE FILMHOLDERS