2.9 Scan to E-Mail Function
2.9.1 Setting the Controller
To perform mail transmission, enter the settings for accessing the mail server (SMTP server).
1.Show the setup screen from the controller operation panel.
2.Select [Network Setup] — [Service Setup] —
[Enable E-mail Services]:
Select “Yes”.
[Outgoing Server]:
Enter the IP address of the mail server (SMTP).
[Time Out (sec)]:
Set the timeout value for accessing the mail server. Unless there is a specific reason to do so, use the default value.
(common setting for the SMTP server and POP3 server)
[Maximum Scan File Size]:
Set the maximum transmission mail size.
3.Start PageScope Web Connection.
4.Enter the password and log into the Administrator Mode.