KZPCM
4.Execute the installation DCL command procedure: $ @ITI_INSTALL
5.The iti_install procedure will automatically:
∙Move the correct version of the driver to your SYS$LOADABLE_IMAGES directory;
∙Move the automatic configuraton (ICBM) program to your SYS$SYSTEM directory;
∙Modify your SYS$USER_CONFIG.DAT file for VMS
When iti_install exits, your adapter(s) are configured, and disks on the adapters are available for use.
5.3Changing the SCSI ID of the Host Adapter (VMS)
At the SRM console (indicated by a >>> or P0> prompt at the system console) storage controllers are identified by the port class prefix PK.
The command >>>show dev pk displays all known disk adapters. When you have identified the location of the adapter you wish to change the ID of, issue the following command:
>>>set pkb0_host_id 6 (this example changes the PKB host adapter ID to 6 from the default of 7)
Verify the change with: >>>show pkb0_host_id
Be sure you do not pick an ID that conflicts with other devices on the bus.