Nikon Follow the steps below to prepare the WT-3 for use, Updating the Camera Firmware

Page 14

Setup

Follow the steps below to prepare the WT-3 for use:

Update the camera ﬁrmware : The WT-3 is supported from camera ﬁ rmware A version 2.00 and B version 2.00. Users of earlier versions will need to update the camera ﬁ rmware as described in the ﬁ rmware update manual on the supplied WT-3 Setup Utility CD.

Copy network proﬁles to the camera: Users of Windows XP Service Pack 1 or later or Mac OS X version 10.3 or later can copy computer or printer proﬁ les to the camera using the supplied WT-3 Setup Utility. Skip this step when using the camera rather than a computer to adjust settings for connection to an ftp server in transfer mode ( 48).

Install the WT-3 Setup Utility ( 7)

Copy network proﬁles to the camera ( 11)

Connect the WT-3 ( 18)

Insert the battery (20)

After setting up the WT-3 as described on the following pages, proceed to “Upload- ing Images: Transfer Mode” (21), “Controlling the Camera: PC Mode” (26), or “Printing Pictures: Print Mode” ( 30).

Updating the Camera Firmware

The WT-3 is supported from camera ﬁ rmware A version 2.00 and B version 2.00. Display the camera ﬁ rmware version as described in the camera manual. If earlier versions are installed, update the camera ﬁ rmware as described in the ﬁ rmware update manual on the supplied WT-3 Setup Utility CD.

To display the ﬁ rmware update manual, start the Install Center as described in Steps 1–3 of “Install the WT-3 Setup Utility” on page 7 (Windows) or 9 (Macintosh) and click D200 Firmware to display the “D200 Firm- ware” folder. Double-clicking INDEX.pdf displays a list

of languages; click a language to display the update

manual (Adobe Reader or Adobe Acrobat Reader 4.0 D200 Firmware or later required).

Additional Updates

Once the camera ﬁ rmware has been updated for use with the WT-3 as described above, all subsequent updates should be performed with the WT-3 connected ( 18) and Oﬀ selected for Wireless transmitter > Wireless LAN system ( 34).

6

Image 14

Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningSupported Modes WT-3 Setup Utility CDSupplied WT-3 Setup Utility CD contains the following Host DescriptionMultiple Transmitters PD-10 Wireless Printer AdapterSystem Requirements WA-E1 Extended Range Antenna Available Separately Restrictions on Wireless DevicesParts of the WT-3 Button using Custom Setting f4 FUNC. Button Command dialSub-command dial WT-3 ControlsUpdating the Camera Firmware Additional UpdatesFollow the steps below to prepare the WT-3 for use Click Easy Install Installing the WT-3 Setup UtilityWindows XP Service Pack 1 or Later Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Proﬁles to the CameraDock Dialog shown at right will be displayed click Next Macintosh Click the WT-3 Setup Utility iconOther Ways of Starting the WT-3 Setup Utility Interface type Choose Ethernet only if the network Enter the following informationProﬁle name Enter a name of up to 16 characters HelpEnter wireless network settings and click Next Choose from the following optionsAd-hoc Wireless Networks Enter network TCP/IP settingsEnter ftp settings and click Next Obtain IP address automatically Select this option ifProﬁles Firewall SettingsMAC Address Filtering Using the PD-10 Creating a Printer ProﬁleConnecting the WT-3 Control Lock Disconnecting the WT-3PB-6 Bellows Place when the cover is fully closed Inserting the BatteryInsert the battery as shown on the inside Tery Info option in the camera setup menuContaining the pictures to be sent Connecting to the Host or ftp ServerTurn the camera oﬀ and insert the memory card Upload imagesEditing ftp Server Proﬁles Select On for Wireless transmitter Wireless LAN systemViewing Proﬁle Information Option DescriptionDuring Upload Loss of SignalUploading Images File NamesSending Interrupting TransmissionSend Green icon is displayed during uploadStatus LEDs Wireless transmitter Wireless LAN systemNetwork Status Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Ethernet Networks Do Not Disconnect the Ethernet Cable Controlling the Camera Using Nikon CaptureWireless Networks Loss of Signal During Transfer Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterStatus LEDs To printer, or transmission errorError connecting to printer Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Proﬁle for the PD-10Page Wireless LAN System Menu GuideEditing ftp Proﬁles WirelessFTP Registration for Connection to ftp Servers Only Text EntryOption Using the MenusChannel Choose channel. †Encryption EncryptionHighlight encryption method TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortEnter user name Highlight PasswordHighlight User ID Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressAuto Send Settings Transfer Mode OnlyFollowing settings are available in transfer mode Delete After Send?Deselect All? Print Print Mode OnlySend Folder Firewalls Creating ftp Proﬁles Using the Camera MenusSelect Transfer mode for Wireless transmit- ter Mode Editing Existing ftp ProﬁlesOptionDescription Errors To Wireless & Ethernet TroubleshootingProblem Solution Glossary Page Subnet mask a mask that divides a network into subnets Ethernet WirelessSpeciﬁcations Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp