Nikon WT-3 Settings Transfer Mode Only, Following settings are available in transfer mode

Page 54
Option
Off
(default)
On

Settings (Transfer Mode Only)

The following settings are available in transfer mode:

Auto Send

Choose whether to upload photographs to the server as they are taken.

Description

Photos are not automatically uploaded as they are taken. Photos can be selected for transmission when camera is in playback mode.

Photos are uploaded immediately after being recorded to camera memory card.* Be sure memory card is inserted in camera before shooting.

*Pictures will not be uploaded to the server if Off is selected in the Wireless transmit- ter > Wireless LAN system menu. Pictures will instead be marked with a “send”indicator as they are recorded to the memory card.

Delete After Send?

Select Yes to delete photographs from the camera memory card automatically once upload is complete (the default op- tion is No). Files uploaded before this option was selected are not affected. Photographs will not be deleted while displayed in slide shows or in the delete, print set, and preset white bal-

ance menus. Sequential fi le numbering is used while this option is in effect, regard- less of the option selected for Custom Setting d6 (File No. Sequence).

Send File As

When uploading NEF+JPEG images to an ftp server, choose whether to send both NEF (RAW) and JPEG fi les or only the JPEG fi les.

Option

Description

NEF (RAW) + JPEG

Upload both NEF (RAW) and JPEG fi les. JPEG fi les are

(default)

sent fi rst.

JPEG only

Upload JPEG fi les only.

46

Image 54
Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningSupported Modes WT-3 Setup Utility CDSupplied WT-3 Setup Utility CD contains the following Host DescriptionPD-10 Wireless Printer Adapter System RequirementsMultiple Transmitters Restrictions on Wireless Devices Parts of the WT-3WA-E1 Extended Range Antenna Available Separately Button using Custom Setting f4 FUNC. Button Command dialSub-command dial WT-3 ControlsAdditional Updates Follow the steps below to prepare the WT-3 for useUpdating the Camera Firmware Click Easy Install Installing the WT-3 Setup UtilityWindows XP Service Pack 1 or Later Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Profiles to the CameraMacintosh Click the WT-3 Setup Utility icon Other Ways of Starting the WT-3 Setup UtilityDock Dialog shown at right will be displayed click Next Interface type Choose Ethernet only if the network Enter the following informationProfile name Enter a name of up to 16 characters HelpEnter wireless network settings and click Next Choose from the following optionsAd-hoc Wireless Networks Enter network TCP/IP settingsEnter ftp settings and click Next Obtain IP address automatically Select this option ifFirewall Settings MAC Address FilteringProfiles Using the PD-10 Creating a Printer ProfileConnecting the WT-3 Disconnecting the WT-3 PB-6 BellowsControl Lock Place when the cover is fully closed Inserting the BatteryInsert the battery as shown on the inside Tery Info option in the camera setup menuContaining the pictures to be sent Connecting to the Host or ftp ServerTurn the camera off and insert the memory card Upload imagesEditing ftp Server Profiles Select On for Wireless transmitter Wireless LAN systemViewing Profile Information Option DescriptionDuring Upload Loss of SignalUploading Images File NamesSending Interrupting TransmissionSend Green icon is displayed during uploadStatus LEDs Wireless transmitter Wireless LAN systemNetwork Status Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Controlling the Camera Using Nikon Capture Wireless Networks Loss of Signal During TransferEthernet Networks Do Not Disconnect the Ethernet Cable Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterStatus LEDs To printer, or transmission errorError connecting to printer Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Profile for the PD-10Page Wireless LAN System Menu GuideEditing ftp Profiles WirelessFTP Registration for Connection to ftp Servers Only Text EntryOption Using the MenusChannel Choose channel. †Encryption Highlight encryption methodEncryption TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortEnter user name Highlight PasswordHighlight User ID Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressAuto Send Settings Transfer Mode OnlyFollowing settings are available in transfer mode Delete After Send?Print Print Mode Only Send FolderDeselect All? Firewalls Creating ftp Profiles Using the Camera MenusSelect Transfer mode for Wireless transmit- ter Mode Editing Existing ftp ProfilesOptionDescription Errors Troubleshooting Problem SolutionTo Wireless & Ethernet Glossary Page Subnet mask a mask that divides a network into subnets Wireless SpecificationsEthernet Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp