Nikon WT-3 user manual Menu Guide, Wireless LAN System

Page 42

Menu Guide

This section describes the settings available for the Wireless transmitter option in the camera setup menu when the WT-3 is connected.

Wireless LAN System

Turn the WT-3 on or oﬀ. Select Oﬀ to reduce the drain on the battery. When On is selected, power consumption is reduced if no memory card is inserted in transfer and print modes or if no data are being transmitted in print mode. Note that in transfer mode transfer will resume immediately when the transceiver is turned on.

Mode

Choose from Transfer mode (21), PC mode (26), and Print mode ( 30). Selecting any of these options displays a proﬁ le list showing the connections available in the selected mode.

Choose Proﬁle

Selecting an option from the Mode menu displays a proﬁ le list showing the connections available in the selected mode. The WT-3 can store a total of up to nine host, server, and printer proﬁ les. To delete a proﬁ le, highlight it in the proﬁ le list and press thebutton. To edit an ftp server proﬁ le, highlight the proﬁ le and press thebutton ( 35).

To view proﬁ le information, highlight the desired proﬁ le and press thebutton. The following information will be displayed.

Proﬁle name (			13, 49)				Device (PC, ftp server, or
Proﬁle name (			13, 49)


SSID (			14, 36)				printer)
							printer)

Interface type (13, 49)

34

Image 42

Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningSupported Modes WT-3 Setup Utility CDSupplied WT-3 Setup Utility CD contains the following Host DescriptionPD-10 Wireless Printer Adapter System RequirementsMultiple Transmitters Restrictions on Wireless Devices Parts of the WT-3WA-E1 Extended Range Antenna Available Separately Button using Custom Setting f4 FUNC. Button Command dialSub-command dial WT-3 ControlsAdditional Updates Follow the steps below to prepare the WT-3 for useUpdating the Camera Firmware Click Easy Install Installing the WT-3 Setup UtilityWindows XP Service Pack 1 or Later Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Proﬁles to the CameraMacintosh Click the WT-3 Setup Utility icon Other Ways of Starting the WT-3 Setup UtilityDock Dialog shown at right will be displayed click Next Interface type Choose Ethernet only if the network Enter the following informationProﬁle name Enter a name of up to 16 characters HelpEnter wireless network settings and click Next Choose from the following optionsAd-hoc Wireless Networks Enter network TCP/IP settingsEnter ftp settings and click Next Obtain IP address automatically Select this option ifFirewall Settings MAC Address FilteringProﬁles Using the PD-10 Creating a Printer ProﬁleConnecting the WT-3 Disconnecting the WT-3 PB-6 BellowsControl Lock Place when the cover is fully closed Inserting the BatteryInsert the battery as shown on the inside Tery Info option in the camera setup menuContaining the pictures to be sent Connecting to the Host or ftp ServerTurn the camera oﬀ and insert the memory card Upload imagesEditing ftp Server Proﬁles Select On for Wireless transmitter Wireless LAN systemViewing Proﬁle Information Option DescriptionDuring Upload Loss of SignalUploading Images File NamesSending Interrupting TransmissionSend Green icon is displayed during uploadStatus LEDs Wireless transmitter Wireless LAN systemNetwork Status Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Controlling the Camera Using Nikon Capture Wireless Networks Loss of Signal During TransferEthernet Networks Do Not Disconnect the Ethernet Cable Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterStatus LEDs To printer, or transmission errorError connecting to printer Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Proﬁle for the PD-10Page Wireless LAN System Menu GuideEditing ftp Proﬁles WirelessFTP Registration for Connection to ftp Servers Only Text EntryOption Using the MenusChannel Choose channel. †Encryption Highlight encryption methodEncryption TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortEnter user name Highlight PasswordHighlight User ID Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressAuto Send Settings Transfer Mode OnlyFollowing settings are available in transfer mode Delete After Send?Print Print Mode Only Send FolderDeselect All? Firewalls Creating ftp Proﬁles Using the Camera MenusSelect Transfer mode for Wireless transmit- ter Mode Editing Existing ftp ProﬁlesOptionDescription Errors Troubleshooting Problem SolutionTo Wireless & Ethernet Glossary Page Subnet mask a mask that divides a network into subnets Wireless SpeciﬁcationsEthernet Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp