Nikon WT-3 user manual Uploading Images, During Upload, File Names, Loss of Signal

Page 31

Uploading Images

1 Press the button to view pictures on the memory card. Display the ﬁ rst picture to be sent in single-image playback or highlight it in the thumbnail list.

2 Press the center of the multi selector while press- ing the button. The image will be marked with a white “send” icon and transmission will begin immediately. During upload, images are marked with a green “sending” icon. Repeat this process to send additional images (pictures will be sent in the order selected).

Images that have been successfully uploaded are marked with a blue “sent” icon. Images can be re- sent by pressing the center of the multi selector while pressing the button to change the blue “sent” icon to a white “send” icon.

During Upload

Do not remove the memory card or disconnect the Ethernet cable during upload.

File Names

If the destination folder on an ftp server contains ﬁ les with the same names as images select- ed for upload, the ﬁ les on the server will be replaced by the images uploaded from the cam- era. Selecting On for Custom Setting d6 (File No. Sequence) during shooting will prevent the camera from creating ﬁ les with duplicate ﬁ le names. When uploading ﬁ les from multiple cameras to the same server, assign each camera its own folder.

Loss of Signal

Transmission may be interrupted if the signal is lost ( 25). Transmission can be resumed by turning the camera oﬀ and then on again, activating the camera exposure meters, or select- ing On for Wireless transmitter > Wireless LAN system once the signal is restored.

23

Image 31

Contents Wireless Transmitter Trademark Information Do not disassemble For Your SafetyWT-3A FCC Radiation Exposure Statement IiiRSS-GEN Exposure of Humans to RF Fields Symbol for Separate Collection in European CountriesTable of Contents Page Life-Long Learning Background KnowledgeHost Description WT-3 Setup Utility CDSupplied WT-3 Setup Utility CD contains the following Supported ModesSystem Requirements PD-10 Wireless Printer AdapterMultiple Transmitters Parts of the WT-3 Restrictions on Wireless DevicesWA-E1 Extended Range Antenna Available Separately WT-3 Controls Command dialSub-command dial Button using Custom Setting f4 FUNC. ButtonFollow the steps below to prepare the WT-3 for use Additional UpdatesUpdating the Camera Firmware Select a language and click Next Installing the WT-3 Setup UtilityWindows XP Service Pack 1 or Later Click Easy InstallClick Next Mac OS X Version 10.3 or Later Installing PictureProject Click Install Click QuitCopying Network Proﬁles to the Camera Connecting the USB CableOther Ways of Starting the WT-3 Setup Utility Macintosh Click the WT-3 Setup Utility iconDock Dialog shown at right will be displayed click Next Help Enter the following informationProﬁle name Enter a name of up to 16 characters Interface type Choose Ethernet only if the networkChoose from the following options Enter wireless network settings and click NextObtain IP address automatically Select this option if Enter network TCP/IP settingsEnter ftp settings and click Next Ad-hoc Wireless NetworksMAC Address Filtering Firewall SettingsProﬁles Creating a Printer Proﬁle Using the PD-10Connecting the WT-3 PB-6 Bellows Disconnecting the WT-3Control Lock Tery Info option in the camera setup menu Inserting the BatteryInsert the battery as shown on the inside Place when the cover is fully closedUpload images Connecting to the Host or ftp ServerTurn the camera oﬀ and insert the memory card Containing the pictures to be sentOption Description Select On for Wireless transmitter Wireless LAN systemViewing Proﬁle Information Editing ftp Server ProﬁlesFile Names Loss of SignalUploading Images During UploadGreen icon is displayed during upload Interrupting TransmissionSend SendingStatus Display Wireless transmitter Wireless LAN systemNetwork Status Status LEDsPictureProject Version 1.6.1 or Later Connecting to the ComputerSelect On for Wireless transmitter Wireless LAN system Wireless Networks Loss of Signal During Transfer Controlling the Camera Using Nikon CaptureEthernet Networks Do Not Disconnect the Ethernet Cable Connected camera control possible Connecting to computer Waiting for connectionSelecting a Printer Use a Reliable Power SourceConnected to printer pictures can be printed To printer, or transmission errorError connecting to printer Status LEDsCreating a Proﬁle for the PD-10 Printing Pictures Using the PD-10 Wireless Printer AdapterPage Menu Guide Wireless LAN SystemText Entry WirelessFTP Registration for Connection to ftp Servers Only Editing ftp ProﬁlesChoose channel. † Using the MenusChannel OptionHighlight encryption method EncryptionEncryption Choose index TCP/IPHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Highlight Folder ServerHighlight Port 1112Guised as a row of dots Highlight PasswordHighlight User ID Enter user nameEnter proxy server address FTP Menu, Page 3/3Delete After Send? Settings Transfer Mode OnlyFollowing settings are available in transfer mode Auto SendSend Folder Print Print Mode OnlyDeselect All? Editing Existing ftp Proﬁles Creating ftp Proﬁles Using the Camera MenusSelect Transfer mode for Wireless transmit- ter Mode FirewallsOptionDescription Errors Problem Solution TroubleshootingTo Wireless & Ethernet Glossary Page Subnet mask a mask that divides a network into subnets Speciﬁcations WirelessEthernet No. of shots Battery LifeFolder FTP, 42, 49 ftp Index