Nikon WT-3 user manual Inserting the Battery, Insert the battery as shown on the inside

Page 28

Turn the camera oﬀ and rotate the control lock on the WT-3 to the L position.

Inserting the Battery

To power the camera when the WT-3 is in place, insert the camera battery into the WT-3 battery chamber. The WT-3 takes one EN-EL3e rechargeable Li-ion battery; other batteries can not be used. Note that the drain on the battery is increased when the WT-3 is attached.

1

2 Open the battery chamber cover.
Insert the battery as shown on the inside of the	Batery latch
3 battery chamber cover. The battery latch will slide
aside during insertion and pop up to lock the bat-
tery in place when fully inserted.
Close the battery-chamber cover. Make sure the
4 cover is properly latched. The latch will click into
place when the cover is fully closed.
Turn the camera on and check the battery level in
5 the control panel or viewﬁ nder or using the Bat-
tery Info option in the camera setup menu.
Removing the Battery
Being careful not to drop the battery, open the battery cham-
ber cover and remove the battery as shown at right.

The EH-6 AC Adapter

The optional EH-6 AC adapter can also be used to power the camera when the WT-3 is connected. Connect the DC plug on the AC adapter to the WT-3 DC-IN connector, not to the camera.

20

Image 28

Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningWT-3 Setup Utility CD Supplied WT-3 Setup Utility CD contains the followingSupported Modes Host DescriptionSystem Requirements PD-10 Wireless Printer AdapterMultiple Transmitters Parts of the WT-3 Restrictions on Wireless DevicesWA-E1 Extended Range Antenna Available Separately Command dial Sub-command dialButton using Custom Setting f4 FUNC. Button WT-3 ControlsFollow the steps below to prepare the WT-3 for use Additional UpdatesUpdating the Camera Firmware Installing the WT-3 Setup Utility Windows XP Service Pack 1 or LaterClick Easy Install Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Proﬁles to the CameraOther Ways of Starting the WT-3 Setup Utility Macintosh Click the WT-3 Setup Utility iconDock Dialog shown at right will be displayed click Next Enter the following information Proﬁle name Enter a name of up to 16 charactersInterface type Choose Ethernet only if the network HelpEnter wireless network settings and click Next Choose from the following optionsEnter network TCP/IP settings Enter ftp settings and click NextAd-hoc Wireless Networks Obtain IP address automatically Select this option ifMAC Address Filtering Firewall SettingsProﬁles Using the PD-10 Creating a Printer ProﬁleConnecting the WT-3 PB-6 Bellows Disconnecting the WT-3Control Lock Inserting the Battery Insert the battery as shown on the insidePlace when the cover is fully closed Tery Info option in the camera setup menuConnecting to the Host or ftp Server Turn the camera oﬀ and insert the memory cardContaining the pictures to be sent Upload imagesSelect On for Wireless transmitter Wireless LAN system Viewing Proﬁle InformationEditing ftp Server Proﬁles Option DescriptionLoss of Signal Uploading ImagesDuring Upload File NamesInterrupting Transmission SendSending Green icon is displayed during uploadWireless transmitter Wireless LAN system Network StatusStatus LEDs Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Wireless Networks Loss of Signal During Transfer Controlling the Camera Using Nikon CaptureEthernet Networks Do Not Disconnect the Ethernet Cable Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterTo printer, or transmission error Error connecting to printerStatus LEDs Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Proﬁle for the PD-10Page Wireless LAN System Menu GuideWireless FTP Registration for Connection to ftp Servers OnlyEditing ftp Proﬁles Text EntryUsing the Menus ChannelOption Choose channel. †Highlight encryption method EncryptionEncryption TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortHighlight Password Highlight User IDEnter user name Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressSettings Transfer Mode Only Following settings are available in transfer modeAuto Send Delete After Send?Send Folder Print Print Mode OnlyDeselect All? Creating ftp Proﬁles Using the Camera Menus Select Transfer mode for Wireless transmit- ter ModeFirewalls Editing Existing ftp ProﬁlesOptionDescription Errors Problem Solution TroubleshootingTo Wireless & Ethernet Glossary Page Subnet mask a mask that divides a network into subnets Speciﬁcations WirelessEthernet Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp