Nikon WT-3 user manual Selecting a Printer, Use a Reliable Power Source

Page 38

Printing Pictures: Print Mode

Choose print mode to print JPEG pictures from the camera to a printer connected to a network computer or to the optional PD-10 wireless printer adapter ( 32). RAW pictures can not be printed directly from the camera, but can be printed using PictureProject or Nikon Capture version 4.4 or later. Index prints are available with the PD-10 only. The principal steps in printing JPEG pictures from the camera are:

Select a printer	30–31
Print pictures	31

Before printing, create a host proﬁ le ( 11–16) and adjust printer settings ( 17).

Selecting a Printer

1 Turn the camera oﬀ and insert the memory card containing the pictures to be printed.

2 To access the network via Ethernet, connect the Ethernet cable ( 4). Note that wireless transfer is disabled while an Ethernet cable is connected. Dis- connect the Ethernet cable before accessing a wireless network. Turn the camera oﬀ before connecting or disconnecting the Ethernet cable.

3 Turn the camera on and conﬁ rm that the printer and host computer or wireless printer adapter are on.

4 Select Print mode for the Wireless transmit- ter > Mode option in the camera setup menu ( 34).

Choose PTP

Before connecting the WT-3, set the USB option in the camera setup menu to PTP ( 11).

Use a Reliable Power Source

Be sure the camera battery is fully charged or use an EH-6 AC adapter (available separately).

30

Image 38

Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningSupported Modes WT-3 Setup Utility CDSupplied WT-3 Setup Utility CD contains the following Host DescriptionMultiple Transmitters PD-10 Wireless Printer AdapterSystem Requirements WA-E1 Extended Range Antenna Available Separately Restrictions on Wireless DevicesParts of the WT-3 Button using Custom Setting f4 FUNC. Button Command dialSub-command dial WT-3 ControlsUpdating the Camera Firmware Additional UpdatesFollow the steps below to prepare the WT-3 for use Click Easy Install Installing the WT-3 Setup UtilityWindows XP Service Pack 1 or Later Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Proﬁles to the CameraDock Dialog shown at right will be displayed click Next Macintosh Click the WT-3 Setup Utility iconOther Ways of Starting the WT-3 Setup Utility Interface type Choose Ethernet only if the network Enter the following informationProﬁle name Enter a name of up to 16 characters HelpEnter wireless network settings and click Next Choose from the following optionsAd-hoc Wireless Networks Enter network TCP/IP settingsEnter ftp settings and click Next Obtain IP address automatically Select this option ifProﬁles Firewall SettingsMAC Address Filtering Using the PD-10 Creating a Printer ProﬁleConnecting the WT-3 Control Lock Disconnecting the WT-3PB-6 Bellows Place when the cover is fully closed Inserting the BatteryInsert the battery as shown on the inside Tery Info option in the camera setup menuContaining the pictures to be sent Connecting to the Host or ftp ServerTurn the camera oﬀ and insert the memory card Upload imagesEditing ftp Server Proﬁles Select On for Wireless transmitter Wireless LAN systemViewing Proﬁle Information Option DescriptionDuring Upload Loss of SignalUploading Images File NamesSending Interrupting TransmissionSend Green icon is displayed during uploadStatus LEDs Wireless transmitter Wireless LAN systemNetwork Status Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Ethernet Networks Do Not Disconnect the Ethernet Cable Controlling the Camera Using Nikon CaptureWireless Networks Loss of Signal During Transfer Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterStatus LEDs To printer, or transmission errorError connecting to printer Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Proﬁle for the PD-10Page Wireless LAN System Menu GuideEditing ftp Proﬁles WirelessFTP Registration for Connection to ftp Servers Only Text EntryOption Using the MenusChannel Choose channel. †Encryption EncryptionHighlight encryption method TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortEnter user name Highlight PasswordHighlight User ID Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressAuto Send Settings Transfer Mode OnlyFollowing settings are available in transfer mode Delete After Send?Deselect All? Print Print Mode OnlySend Folder Firewalls Creating ftp Proﬁles Using the Camera MenusSelect Transfer mode for Wireless transmit- ter Mode Editing Existing ftp ProﬁlesOptionDescription Errors To Wireless & Ethernet TroubleshootingProblem Solution Glossary Page Subnet mask a mask that divides a network into subnets Ethernet WirelessSpeciﬁcations Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp