Nikon WT-3 Creating ftp Profiles Using the Camera Menus, Firewalls, Editing Existing ftp Profiles

Page 56

Appendices

Creating ftp Profiles Using the Camera Menus

In transfer mode, the camera menus can be used to create ftp profi les in place of the WT-3 Setup Utility. Before creating an ftp profi le with the camera menus, set the camera USB option to PTP and connect the WT-3. To prevent unexpected loss of power, be sure the battery is fully charged or use an optional EH-6 AC adapter. The drain on the battery can be reduced by selecting Off for the Wireless trans- mitter > Wireless LAN system option in the camera setup menu before adjusting ftp settings.

1 Turn the camera on.

2 Select Transfer mode for Wireless transmit- ter > Mode ( 34).

3 A profi le list will be displayed showing the con- nections available in transfer mode. Highlight FTP registration and press the multi selector to the right. Note a new ftp profi le can not be cre- ated if the camera already contains nine profi les; if necessary, delete a profi le using thebutton.

Firewalls

The WT-3 uses TCP ports 20 and 21 for ftp. It may be necessary to adjust fi rewall settings before connecting to a server behind a fi rewall ( 16).

Using the Menus

If the shutter-release button on the camera or WT-3 is pressed while menus are displayed, the monitor will turn off and any changes to the current profi le will be lost. Do not press the shutter-release button while editing profi les.

Editing Existing ftp Profiles

See the Menu Guide for information on using the camera menus to edit existing ftp profi les ( 35).

48

Image 56
Contents Wireless Transmitter Trademark Information For Your Safety Do not disassembleWT-3A Iii FCC Radiation Exposure StatementSymbol for Separate Collection in European Countries RSS-GEN Exposure of Humans to RF FieldsTable of Contents Page Background Knowledge Life-Long LearningWT-3 Setup Utility CD Supplied WT-3 Setup Utility CD contains the followingSupported Modes Host DescriptionMultiple Transmitters PD-10 Wireless Printer AdapterSystem Requirements WA-E1 Extended Range Antenna Available Separately Restrictions on Wireless DevicesParts of the WT-3 Command dial Sub-command dialButton using Custom Setting f4 FUNC. Button WT-3 ControlsUpdating the Camera Firmware Additional UpdatesFollow the steps below to prepare the WT-3 for use Installing the WT-3 Setup Utility Windows XP Service Pack 1 or LaterClick Easy Install Select a language and click NextClick Next Mac OS X Version 10.3 or Later Click Install Click Quit Installing PictureProjectConnecting the USB Cable Copying Network Profiles to the CameraDock Dialog shown at right will be displayed click Next Macintosh Click the WT-3 Setup Utility iconOther Ways of Starting the WT-3 Setup Utility Enter the following information Profile name Enter a name of up to 16 charactersInterface type Choose Ethernet only if the network HelpEnter wireless network settings and click Next Choose from the following optionsEnter network TCP/IP settings Enter ftp settings and click NextAd-hoc Wireless Networks Obtain IP address automatically Select this option ifProfiles Firewall SettingsMAC Address Filtering Using the PD-10 Creating a Printer ProfileConnecting the WT-3 Control Lock Disconnecting the WT-3PB-6 Bellows Inserting the Battery Insert the battery as shown on the insidePlace when the cover is fully closed Tery Info option in the camera setup menuConnecting to the Host or ftp Server Turn the camera off and insert the memory cardContaining the pictures to be sent Upload imagesSelect On for Wireless transmitter Wireless LAN system Viewing Profile InformationEditing ftp Server Profiles Option DescriptionLoss of Signal Uploading ImagesDuring Upload File NamesInterrupting Transmission SendSending Green icon is displayed during uploadWireless transmitter Wireless LAN system Network StatusStatus LEDs Status DisplayConnecting to the Computer PictureProject Version 1.6.1 or LaterSelect On for Wireless transmitter Wireless LAN system Ethernet Networks Do Not Disconnect the Ethernet Cable Controlling the Camera Using Nikon CaptureWireless Networks Loss of Signal During Transfer Connecting to computer Waiting for connection Connected camera control possibleUse a Reliable Power Source Selecting a PrinterTo printer, or transmission error Error connecting to printerStatus LEDs Connected to printer pictures can be printedPrinting Pictures Using the PD-10 Wireless Printer Adapter Creating a Profile for the PD-10Page Wireless LAN System Menu GuideWireless FTP Registration for Connection to ftp Servers OnlyEditing ftp Profiles Text EntryUsing the Menus ChannelOption Choose channel. †Encryption EncryptionHighlight encryption method TCP/IP Choose indexHighlight Address TCP/IP Menu, Page 2/2 Highlight Address Server Highlight Folder1112 Highlight PortHighlight Password Highlight User IDEnter user name Guised as a row of dotsFTP Menu, Page 3/3 Enter proxy server addressSettings Transfer Mode Only Following settings are available in transfer modeAuto Send Delete After Send?Deselect All? Print Print Mode OnlySend Folder Creating ftp Profiles Using the Camera Menus Select Transfer mode for Wireless transmit- ter ModeFirewalls Editing Existing ftp ProfilesOptionDescription Errors To Wireless & Ethernet TroubleshootingProblem Solution Glossary Page Subnet mask a mask that divides a network into subnets Ethernet WirelessSpecifications Battery Life No. of shotsIndex Folder FTP, 42, 49 ftp