Lenovo S710 Automatic configuration and power interface Acpi Bios, Automatic Power-on features

Page 112

Automatic configuration and power interface (ACPI) BIOS

Being an ACPI BIOS system, the operating system is allowed to control the power management features of the computer and the setting for Advanced Power Management (APM) BIOS mode is ignored. Not all operating systems support ACPI BIOS mode.

Automatic Power-on features

The Automatic Power-On features within the Power Management menu allow you to enable and disable features that turn on the computer automatically.

•Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event or a daily event.

•Wake on LAN: If the computer has a properly configured token-ring or Ethernet LAN adapter card that is Wake on LAN-enabled and there is remote network management software, you can use the Wake on LAN feature. When you set Wake on LAN to Enabled, the computer will turn on when it receives a specific signal from another computer on the local area network (LAN).

To enable the Wake on LAN function or the Wake Up on Alarm function on the Windows 8 operating system, do the following:

1.Open Control Panel.

2.Click Hardware and Sound ➙ Power Options.

3.In the left panel, click Choose what the power buttons do.

4.In the Shutdown setting section, clear Turn on fast startup.

Note: If the settings are unavailable, click Change settings that are currently unavailable.

5.Click Save changes.

106Lenovo S710 All-In-OneHardware Maintenance Manual

Image 112

Contents Lenovo S710 All-In-One Hardware Maintenance Manual Page Lenovo S710 All-In-One Hardware Maintenance Manual First Edition August Copyright Lenovo Contents Appendix A. Notices Important Safety Information About this manualLenovo S710 All-In-OneHardware Maintenance Manual General safety Safety informationElectrical safety Lenovo S710 All-In-OneHardware Maintenance Manual Safety inspection guide Handling electrostatic discharge-sensitive devicesSafety notices multi-lingual translations Grounding requirementsTo Connect To Disconnect ≥18 kg 37 lbs ≥32 kg 70.5 lbs ≥55 kg 121.2 lbs Safety information Perigo Cuidado Para Conectar Para DesconectarPerigo Safety information Lenovo S710 All-In-OneHardware Maintenance Manual Safety information Connexion Déconnexion ≥18 kg 37 lbs ≥32 kg 70.5 lbs ≥55 kg 121.2 lbs Vorsicht Achtung Arbeitsschutzrichtlinien beim Anheben der Maschine beachtenLenovo S710 All-In-OneHardware Maintenance Manual Safety information Pericolo Per collegarsi Per scollegarsiPrestare attenzione nel sollevare lapparecchiatura Lenovo S710 All-In-OneHardware Maintenance Manual Peligro No debe Adopte procedimientos seguros al levantar el equipo Lenovo S710 All-In-OneHardware Maintenance Manual General information SpecificationsLenovo Support Web site Lenovo S710 All-In-OneHardware Maintenance Manual Problem determination tips General CheckoutLenovo S710 All-In-OneHardware Maintenance Manual Basic troubleshooting Troubleshooting and diagnosticsSymptom Action Troubleshooting procedure Accessing Control Panel on the Windows 8 operating systemClick Settings Click Control Panel Troubleshooting Audio problemsSound comes from one external speaker only No audio in WindowsNo audio in DOS applications or games CD problems CD or DVD does not workDVD problems Black screen instead of DVD videoDVD movie will not play No audio or intermittent audio while playing DVD movieIntermittent problems Keyboard, mouse, or pointing device problemsInvalid disc or no disc found message All or some keys on the keyboard do not workMouse or pointing device does not work Pointer on the screen does not move smoothly with the mouseFingerprint reader does not work Click Hardware and Sound Click Devices and PrintersWireless keyboard does not work Monitor problemsWrong characters appear on the screen Image appears to be flickering Image is discoloredNetworking problems Ethernet problemsYour computer cannot connect to the network Click Start Control Panel Click Hardware and SoundWake on LAN feature is not working Wireless LAN problemAdapter stops working for no apparent reason Option problems Wireless WAN problemBluetooth problems Sound does not come from the Bluetooth headphonePerformance and lockup problems An option that was just installed does not workAn option that previously worked does not work now Insufficient free hard disk drive spaceClick Disk Cleanup Click Programs Click Turn Windows features on or offClick Disk Cleanup Click Clean up system files Programs and Features area, click the Clean up buttonPrinter problems Serial port problemsClick Defragment Now, then click Continue Click OptimizeSoftware problems Software does not work as expectedUSB problems Using the Setup Utility program Starting the Setup Utility programViewing and changing settings Using passwordsPower-On Password Administrator PasswordSetting, changing, and deleting a password Enabling or disabling a deviceSelecting a temporary startup device Selecting a startup deviceSelecting or changing the startup device sequence Exiting the Setup Utility program Symptom-to-FRU Index Hard disk drive boot errorPower Supply Problems Beep symptomsPost error codes Beep Symptom FRU/ActionShort and 1 long beeps Dram memory error Error code Post Error Message Description/ActionMessage/Symptom FRU/Action Miscellaneous error conditionsDisplay/Monitor First device network Second device hard diskUndetermined problems Lenovo S710 All-In-OneHardware Maintenance Manual Front connector, control, and indicator locations LocationsRear connector locations Locating major FRUs and CRUs Locating major FRUs and CRUs Number FRU description Self-service CRU Optional-service CRU Looking up FRU informationLocations of the parts and connectors on the system board Locating parts on the system boardRemoving and reinstalling the system stand hinge cover Replacing FRUsRemoving and reinstalling the system stand Removing the system stand hinge coverRemoving the system stand Lenovo S710 All-In-OneHardware Maintenance Manual Removing and reinstalling the Vesa mount bracket Removing the computer coverReplacing the hard disk drive Removing the Vesa mount bracketRemoving the hard disk drive Replacing the optical drive Removing the hard disk drive from the bracketRemoving the optical drive Removing and reinstalling the system board shield Connecting the cable and installing the screwReplacing the microprocessor fan Removing the system board shieldReplacing the heat sink assembly Removing the microprocessor fanSafety, Warranty, and Setup Guide, go to Replacing the microprocessor Opening the retainer to access the microprocessor Removing the microprocessor Replacing the battery Removing the batteryInstalling a new battery Replacing the inverterInstalling or replacing a memory module Removing the screws that secure the inverterRemoving a memory module Replacing the internal speakers Removing the internal speakersReplacing the integrated camera Removing the integrated cameraReplacing the system board Lenovo S710 All-In-OneHardware Maintenance Manual Replacing the LCD panel Disconnect the LCD panel cable from the system board Removing the four screws that secure the LCD panel Replacing the Wi-Fi card Reconnect the LCD panel cable to the system boardRemoving the screw that secures the Wi-Fi card Completing the parts replacement Replacing the USB keyboard or mouseInstalling the computer cover Lenovo S710 All-In-OneHardware Maintenance Manual FRU lists-S710 CRU IDWD XL1000S WD10EZEX-08RKKA0 1TB HDD-LH PIB65F/TAHOE Rear IO-1 China DIP +BKT Foot Holder Pcak W/RUBBER Additional Service Information Updating flashing the Bios from your operating system Power management Recovering from a POST/BIOS update failureClick Downloads and drivers Automatic configuration and power interface Acpi Bios Automatic Power-on featuresAppendix A. Notices 107Television output notice European conformance CE mark TrademarksIndex 109POST/BIOS update failure