Lenovo 1008, 992, 981, 1010 manual Using the ThinkServer EasyStartup program

Page 90

7.Reinstall the server cover and reconnect the power cords for the server and monitor to electrical outlets. See “Completing the parts replacement” on page 57.

8.Repeatedly press and release the F12 key when turning on the server. When the Please select boot device window displays, release the F12 key.

9.Select the optical drive of your choice as the first boot device.

10.Insert the POST/UEFI update (flash) disc into the optical drive and press Enter. The recovery begins. The recovery session will take two to three minutes. During this time, you will hear a series of beeps.

11.After the recovery session is completed, the series of beeps will end, and the system will automatically turn off.

12.Repeat step 1 through step 4.

13.Move the Clear CMOS /Recovery jumper back to the standard position (pin 1 and pin 2).

14.Reinstall all parts and reconnect all cables that have been removed.

15.Reinstall the server cover and reconnect all the power cords and other cables. See “Completing the parts replacement” on page 57.

16.Turn on the server and remove the disc from the optical drive.

Using the ThinkServer EasyStartup program

The ThinkServer EasyStartup program simplifies the process of installing the operating system and device drivers by performing the following tasks:

Detects installed hardware devices

Guides you through the process of creating a response file

Prepares the hard disk drive for installation

Prompts you to insert the operating-system installation disc

Initiates an unattended installation of the operating system and device drivers for most adapters and devices

The program is contained on the ThinkServer EasyStartup DVD provided with your server. If you did not receive the DVD with your server, you can download an ISO image of the DVD from http://www.lenovo.com/support. The program has a built-in help system and User Guide to answer questions you might have. The program also provides compatibility notes to help you determine what server configurations and operating systems are supported by that specific version of the program.

The ThinkServer EasyStartup program also enables you to save the response file on a USB device for reuse, and an option that enables you to install an operating system using the saved response file. This option is useful if you intend to install the same operating system on similarly configured ThinkServer servers.

Notes:

1.If you intend to implement a RAID, make sure your storage controller or RAID adapter is configured correctly before you use the ThinkServer EasyStartup program to install the operating system.

2.If you are using any external storage devices or fiber channels, use the utilities provided with the device. You also will have to provide the device drivers for these devices and install them after the EasyStartup program finishes installing the operating system.

3.The ThinkServer EasyStartup DVD requires that you have a DVD drive that is configured as your first device in the startup sequence. Use the Setup Utility program to view or change your startup sequence. See “Viewing or changing the startup device sequence” on page 79.

4.To install an operating system, you need the operating system installation disc (CD or DVD) and the associated product key, if one was provided.

84ThinkServerHardware Maintenance Manual

Image 90
Contents ThinkServer Hardware Maintenance Manual Page ThinkServer Hardware Maintenance Manual Second Edition December Copyright Lenovo Contents Index Important Safety Information About this manualSafety statements To Connect To DisconnectAbout this manual ≥ 18 kg 39.7 lb ≥ 32 kg 70.5 lb Important information about replacing RoHS compliant FRUs ThinkServerHardware Maintenance Manual Features and specifications General informationInput/Output I/O features Power supplySystem management features Security featuresSoftware EasyStartupEasyManage ThinkServerHardware Maintenance Manual Problem determination tips General CheckoutThinkServerHardware Maintenance Manual Running the diagnostic program from a diagnostic disc DiagnosticsPC-Doctor for DOS Creating a diagnostic disc Navigating through the diagnostics programsRunning tests Test resultsTroubleshooting tables Hard disk drive boot errorViewing the test log Error FRU/Action Power Supply ProblemsBeep symptoms Beep Symptom FRU/ActionContinuos long beeps Dram memory error Post error codesLong and 9 short beeps Bios ROM error Post Error Message Description/ActionEasyStartup problems Hard Disk Install FailureMiscellaneous error messages Message/Symptom FRU/ActionDisplay/Monitor First device network Second device hard diskUndetermined problems ThinkServerHardware Maintenance Manual Locating Server Controls and connectors Front viewRear view Connector Description System-board internal connectors System board connector locationsInternal components Component locationsGuidelines for trained service technicians Replacing FRUsInspecting for unsafe conditions Guidelines for servicing electrical equipment Handling static-sensitive devicesServer components Replacing FRUs Removing the server coverRemoving and reinstalling the front bezel Removing the server coverInstalling or replacing a PCI card Removing the front bezelOpening the PCI card latch Removing a PCI card Replacing the battery Installing a PCI cardInstalling or replacing a memory module Removing the old batteryOpening the retaining clips Installing or replacing the optical drive Installing a memory moduleRemoving the optical drive Installing a secondary hard disk drive Replacing the secondary hard disk driveRemoving the secondary hard disk drive cage Installing the secondary hard disk drive Replacing the power supply assembly Removing the screws for the power supply assemblyReplacing the heat sink and fan assembly Removing the heat sink and fan assembly Replacing the microprocessorThinkServerHardware Maintenance Manual Replacing the system board Removing the microprocessorRemoving the system board Installing the socket cover Replacing the primary hard disk drive Removing the primary hard disk driveInstalling the hard disk drive into the bracket Installing the primary hard disk drive Replacing the front fan assembly Removing the front fan assembly Replacing the rear fan assembly Installing the front fan assemblyRemoving the rear fan assembly Completing the parts replacement Installing the rear fan assemblyUpdating the server configuration Reinstalling the server coverParts Listing, TS200v Machine Types 0981, 0992, 1008, Machine TypeFRUs CTO FRUs listed in the following tables are not illustrated Line CordsWindows Server 2008 R2 Foundation 64-bit Ship Groups Windows Server 2008 R2 Standard 64-bitWindows Small Business Server 2008 Standard w/ SP2 Microprocessor, Intel Celeron, 2.26G/2M-L2 models CTO Lenovo RDX drive bay models CTO All Models Lenovo RDX 320GB cartridge models CTO All Models 90Y1170 Microprocessor, Core i5-650 / 3.20GHz models CTO 15U 15Y Lenovo RDX drive bay models CTO All Models 256MB Nvidia FX380 2xDVI models CTO All models Windows Server 2008 R2 Foundation 64-bit 16G 16J 16L 16M 16S 16U 16Y Memory modules, DDR3 ECC PC3-10600 2GB Udimm 1333 models CTO 16U 16Y Line Cord Israel models CTO 16G ThinkServerHardware Maintenance Manual Starting the Setup Utility program Configuring the serverUsing the Setup Utility program Viewing and changing settingsUsing passwords Password considerationsSelecting a startup device USB SetupEnabling or disabling a device Sata ControllerConfiguring RAID Advanced settingsExiting from the Setup Utility program RAID LevelCreating RAID volumes Deleting RAID volumesUsing system programs Updating system programsUpdating flashing the Uefi from a disc Recovering from a POST/UEFI update failure Updating flashing the Uefi from your operating systemUsing the ThinkServer EasyStartup program Installing ThinkServer EasyManage Agent ThinkServerHardware Maintenance Manual Appendix A. Notices European conformance CE mark Trademarks Export classification noticeTelevision output notice Electronic emissions noticesIndustry Canada Class B emission compliance statement European Union EMC Directive conformance statementThinkServerHardware Maintenance Manual Power cord notice Canadian Department of Communications certification labelPower cord part number Used in these countries and regions Waste electrical and electronic equipment Weee notices European Union EU Weee statement Disposing of disused lithium batteries from Lenovo computersAppendix A. Notices ThinkServerHardware Maintenance Manual Index CRURemoving Page Part Number 1P P/N