Penpower PCE Writing Pad, PCE Trial, PCE Standard, PCE Scanner Candidates, Pre-emptive Linking

Chapter 6 Pen Scanner Version 6-17

*. Candidates

If you find an incorrect character in your result box, use the Candidate command to replace it with the correct character.

1.The illustration shows a character that has been recognized incorrectly.

2.Rest your cursor on the character for 1-2 seconds and a menu showing a list of suggested corrections displays.

3.If the correct character appears among the list of characters presented, click the character to have your current incorrect character replaced.

*. Pre-emptive Linking

In any consecutive set of characters (2 characters), the first character is the second char- acter’s uplink, while the second character is the first character’s downlink. For example, in 科技, 科 is 技’s uplink, while the character 技 is 科’s downlink.

1.When using the WorldPenScan, the recognition results will be immediately displayed on the desired application.

2.For example, the character 恬 is wrongly recognized as 恰, and 科 is wrongly rec- ognized as 料 as shown on the right side.

3.Hover your cursor on the character 恰 for 1-2 seconds and a toolbar displays listing possible characters. On the toolbar,

click the button (uplink) and a toolbar displays a list of combinations which are

possible replacements for the character before 恰.

4.Hover your cursor on the character 料 for 1-2 seconds, and again a toolbar displays the list of possible replacements. This

time, click the button (downlink) and a list of combination of characters for the

character after 料 will display.

5.You will see that the wrong result『蒙恰 料技』 is already updated as 『蒙恬科

技』.