Sanyo VCC-WB4000 Lit orange alarm recording image playback is not possible, Red indicator

Page 19
Output status when “ALARM OUT TIME” is set to “REMOTE”. The output status can be turned on and off repeatedly by clicking the indicator.

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Network Camera (Wired LAN) Settings

6ALARM DATA indicator

•Lit red: (alarm recording image playback is possible)

Internal memory or expanded memory (installed in the PC card slot) is filled by alarm recording images.

•Lit orange: (alarm recording image playback is not possible)

Alarm recording images are currently being transferred from internal memory to expanded memory, alarm recording is in progress, or and expanded memory error has occurred.

•Lit green: (alarm recording image playback is possible)

Alarm data can still be recorded into the expanded memory.

Note: Refer to “Alarm Settings” for further details on alarm recording. (p. 32)

7REMOTE ALARM indicator (p. 38)

If “ALARM OUT MODE” is set to “REMOTE CONTROL” (remote alarm operation indicator display: black), the output status from the alarm output connector can be set to continuous output or timed output.

•Black indicator:

No output status when “ALARM OUT TIME” has been set.

•Red indicator:

Output status when “ALARM OUT TIME” has been selected. When the set time is exceeded, the indicator changes to black, but if you click the indicator once more, the specified indicator illuminates.

•Grey indicator:

No output status when “ALARM OUT TIME” is set to “REMOTE”.

•Orange indicator:

8BEEP OFF indicator (p. 34)

If “ALARM SOUND MODE” is set to “USE”, this display appears at the same time as the buzzer sounds when an alarm is detected. Click the indicator to stop the alarm buzzer from sounding.

The alarm buzzer will stop automatically when alarm recording is complete.

9FRAME RATE setting (default setting: HIGH)

Set the image transmission speed from the drop-down list box. Images can be transmitted at maximum speed depending on the network environment that the camera is connected to.

For example, if the maximum transmission speed for the network being connected to is 15 fps, then the images can only be transmitted at a maximum speed of 15 fps, even if the frame rate is set to “MID 3” or higher.

Available settings:

BASIC (5 fps), MID 1 (10), MID 2 (15), MID 3 (20), HIGH (30)

FPICTURE QUALITY setting (default setting: MID 2)

Use the drop-down list box to select the image quality (image compression ratio). If a higher compression ratio is used (BASIC), the volume of image data becomes smaller (the amount of image deterioration becomes greater) and the transmission speed becomes faster.

Available settings:

BASIC, MID 1, MID 2, MID 3, HIGH

Note: Alarm recording is carried out at the picture quality that is specified in the alarm recording settings, not at the setting that is made here. (p. 41)

– 18 –

English

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Network Camera VCC-WB4000Contents For the customers in Canada Information to userPour la clientèle canadienne Precautions Operating environment FeaturesAccessoriesLens mount cap Monitor OUT connectorPower indicator Name and Function of Each PartName and Function of Each Part Remove the lens mount cap Attach the CS mount-type lens Attaching the LensFor C mount type Flange Back Adjustment Basic Connections ConnectionsConnections Connecting to a LANComputer Network SET Settings p Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer p Wired LAN Settings pClick the OK button Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer Turn on the power for the computerUninstalling the plug-in software Click the Install buttonPlug-in software Cookie Settings Browser SettingsCamera uses cookies Example Subnet mask setting Type Wired LAN SettingsLanguage selection window Fine Image quality mode select buttonsAvailable settings Auto default setting Initial Camera ScreenMenu select buttons Wireless LAN buttonAlarm button Alarm indicatorGrey indicator Lit orange alarm recording image playback is not possibleLit green alarm recording image playback is possible Red indicatorJImage display area Resolution and Expansion settings default settings 640x480Selection screen example SET buttonNetwork Speed Network SET SettingsSet the password Click the Network menu select buttonWhen a password has been changed Changing a passwordMAC Address display Turn the camera off and then back on again Changing the Access Level ID2 or ID3For Operator access level Access Level SettingsFor User access level Daylight Saving Clock SET SettingsDaylight Saving Mode TimezoneIris Camera SettingsLive Image Camera TitleSetting manual white balance Manual Camera SettingsDAY/NIGHT Settings Setting the camera titleBurst ModeSet Polarity to no example Auto Mode SettingsColor Mode Settings Set Burst to OFF example Click the SET buttonSet AGC Gain to +12 dB example Click the SET button Mode SettingsConnection example Figure Color mode Timer modeChange the DAY/NIGHT setting to Color mode Change the DAY/NIGHT setting to Timer modeClick the Alarm menu select button Alarm SettingsAlarm Settings Alarm Buffering SET Setting Set Alarm REC USE to USE and then click the SET button External Alarm Sensor SettingAlarm Resolution Set Alarm Buffering to ON, and then click the Detail buttonSet the sensor marks Motion Detector SET SettingsExternal Alarm Sensor and Motion Detector Settings Set Motion Detector Level to 2 example Motion Detector Level Sensitivity SettingRemote Alarm Operations Alarm Output for a Specified PeriodContinuous Alarm Output Set Buffering Area to PRE/POST 2/8 Pre-alarm/Post-alarm RecordingAlarm detected Set Buffering Area to PRE/POST 0/10Fixed Settings During Pre/Post-Alarm Recording Recording New Alarm DataSaving to an Expansion Memory Card Alarm Data indicator green will illuminateInsert the expansion memory card Viewing Live Images Viewing the View Frame Screen Viewing Live ImagesClick the View Frame menu select button Frame Rate Playing Back Alarm DataPlaying Back Alarm Data in the Camera’s Internal Memory Descriptions of Alarm Operation ButtonsPlaying Back Expansion Memory Card Images Playing Back Alarm DataPlaying Back Alarm Images Stored in a Computer Click the Alarm Data indicator while it is red or greenEND ResolutionPrevious Alarm Data Deleting Saving Alarm Images onto a Computer as Still Images Saving Live Images and Alarm ImagesSaving Live Images onto a Computer Click the Play button and then click the Download button Saving Live Images and Alarm ImagesSaving All of a Single Alarm Event onto a Computer When the File Download pop-up menu is displayed, click SaveCamera wireless LAN settings TCP/IP settings Wireless LAN SET SettingsCamera wired LAN settings TCP/IP settings Wireless LAN device settings TCP/IP settingsCamera Wireless LAN Settings Wireless LAN SET SettingsEncipherment Settings Description of Wireless LAN SET ScreenDouble-click the Camset icon on the desktop PPP Dial-up SettingsPPP Connection to an Internet Service Provider Connecting the camera and installing the softwareClose the Camset window PPP Dial-up SettingsClick the SET to Camera button Click the Save Info File buttonAuthentication Dial to Provider SettingsProvider TEL. no Telephone line Dial from PC SettingPPP Connection from a Computer Camera ComputerSet the following items Make the settings in the PPP setting screenClick the Language button to change the language RS-232C Settings RS-232C SETLanguage Selection Click the RS-232C menu select buttonSUB-MICROCOMPUTER Version Status CheckingClick the Status menu select button Firmware VersionGlossary of Terms Glossary of Terms Pre-alarm and post-alarm recording If the camera cannot be connected TroubleshootingIf you forget the IP Address Specifications Exclusions Printed on recycled paper 1AC6P1P2677 L5AM2/US 0603KP-CZ

VCC-WB4000 specifications

The Sanyo VCC-WB4000 is an advanced surveillance camera designed primarily for outdoor use, offering state-of-the-art features that cater to a variety of security needs. This robust model stands out for its high-resolution imaging capabilities combined with powerful technologies that ensure reliable performance in various lighting conditions.

At the heart of the VCC-WB4000 is its exceptional image sensor. The camera boasts a 1/3-inch CCD sensor, which delivers clear and detailed images with a resolution of up to 400 TV lines. This ensures that users can capture high-quality footage, even in challenging environments. Additionally, the camera’s 3x optical zoom lens allows for versatile viewing angles and the ability to focus on specific subjects without sacrificing image quality.

One of the defining characteristics of the VCC-WB4000 is its weather-resistant housing. Designed to withstand harsh outdoor conditions, this camera is sealed against dirt and moisture, making it suitable for various climates. Its durable construction not only enhances longevity but also reduces maintenance needs, ensuring consistent performance over time.

The Sanyo VCC-WB4000 also integrates advanced digital signal processing (DSP) technology, which optimizes image clarity and enhances features such as automatic gain control, backlight compensation, and noise reduction. This ensures clear images in both bright and low-light situations, providing reliable monitoring around the clock.

Another notable feature is its flexible installation options. The camera can be mounted on walls or ceilings with ease, and its compact design means it can fit into a variety of settings without drawing excessive attention.

Connectivity is also a strong point for the VCC-WB4000. It incorporates multiple output options, including analog video output, which simplifies integration with existing surveillance systems. This ensures that users can easily incorporate the camera into their security infrastructure without the need for extensive reconfiguration.

In conclusion, the Sanyo VCC-WB4000 is an excellent choice for those seeking a dependable outdoor surveillance solution. With its high-resolution imaging, robust weatherproof design, and advanced features, it stands as a testament to Sanyo’s commitment to providing effective security solutions. Whether for residential, commercial, or industrial applications, the VCC-WB4000 delivers the quality and reliability necessary to keep properties secure.
Top Page Image Contents