Sanyo VCC-WB4000 Attaching the Lens, Remove the lens mount cap Attach the CS mount-type lens

Page 8

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Attaching the Lens

Use a DC-type automatic iris-type lens (sold separately).

1

2

Remove the lens mount cap.

Attach the CS mount-type lens.

Note:

The “L” part of the lens should be 5 mm or less in length. If a lens that does not

conform to this standard isL used, it will not be possible to

attach the lens correctly.

3 Connect the lens iris plug to the lens iris output connector of the camera.

1 (–) control coil

3 (+) drive coil

2 (+) control coil

4 (–) drive coil

2

1

2

1

 

 

4

3

 

 

 

 

4

3

(Connecting to the lens iris plug)

Lenses from other manufacturers may have different plug shapes and specifications. In such cases, you may need to rewire the lens iris plug.

1Cut off the plug of the lens cable, cut off approximately 8 mm of the insulation, and then strip the ends of the cable sheaths leaving approximately 6 mm of sheath intact.

Gently screw the lens into the camera.

The following automatic iris-type lenses can be used.

VCL-CS8LY (standard, f = 8 mm)

VCL-CS4LY (wide angle, f = 4 mm)

VCL-CS2LY (extra wide angle, f = 2.8 mm)

2Solder the ends of the cable wires to the ends of the pins, and then attach the cover of the lens iris plug.

3

2

For C mount type

In order to allow correct adjustment of the flange back, attach the C mount adapter ring (option) to the lens before attaching the lens to the camera.

English

– 7 –

Image 8
Contents VCC-WB4000 Network CameraContents Pour la clientèle canadienne Information to userFor the customers in Canada Precautions FeaturesAccessories Operating environmentMonitor OUT connector Power indicatorName and Function of Each Part Lens mount capName and Function of Each Part For C mount type Attaching the LensRemove the lens mount cap Attach the CS mount-type lens Flange Back Adjustment Connections Basic ConnectionsConnecting to a LAN ConnectionsNetwork Camera Wired LAN Settings Installation of Plug-in Software to the Computer pWired LAN Settings p Computer Network SET Settings pNetwork Camera Wired LAN Settings Installation of Plug-in Software to the ComputerTurn on the power for the computer Click the OK buttonPlug-in software Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Language selection window Wired LAN SettingsExample Subnet mask setting Type Image quality mode select buttons Available settings Auto default settingInitial Camera Screen FineWireless LAN button Alarm buttonAlarm indicator Menu select buttonsLit orange alarm recording image playback is not possible Lit green alarm recording image playback is possibleRed indicator Grey indicatorResolution and Expansion settings default settings 640x480 Selection screen exampleSET button JImage display areaNetwork SET Settings Set the passwordClick the Network menu select button Network SpeedMAC Address display Changing a passwordWhen a password has been changed Changing the Access Level ID2 or ID3 Turn the camera off and then back on againFor User access level Access Level SettingsFor Operator access level Clock SET Settings Daylight Saving ModeTimezone Daylight SavingCamera Settings Live ImageCamera Title IrisCamera Settings Setting manual white balance ManualSetting the camera title DAY/NIGHT SettingsMode BurstAuto Mode Settings Color Mode SettingsSet Burst to OFF example Click the SET button Set Polarity to no exampleMode Settings Set AGC Gain to +12 dB example Click the SET buttonColor mode Timer mode Change the DAY/NIGHT setting to Color modeChange the DAY/NIGHT setting to Timer mode Connection example FigureAlarm Settings Click the Alarm menu select buttonAlarm Settings Alarm Buffering SET Setting External Alarm Sensor Setting Alarm ResolutionSet Alarm Buffering to ON, and then click the Detail button Set Alarm REC USE to USE and then click the SET buttonMotion Detector SET Settings Set the sensor marksExternal Alarm Sensor and Motion Detector Settings Motion Detector Level Sensitivity Setting Remote Alarm OperationsAlarm Output for a Specified Period Set Motion Detector Level to 2 exampleContinuous Alarm Output Pre-alarm/Post-alarm Recording Alarm detectedSet Buffering Area to PRE/POST 0/10 Set Buffering Area to PRE/POST 2/8Recording New Alarm Data Fixed Settings During Pre/Post-Alarm RecordingInsert the expansion memory card Alarm Data indicator green will illuminateSaving to an Expansion Memory Card Viewing Live Images Click the View Frame menu select button Viewing Live ImagesViewing the View Frame Screen Playing Back Alarm Data Playing Back Alarm Data in the Camera’s Internal MemoryDescriptions of Alarm Operation Buttons Frame RatePlaying Back Alarm Data Playing Back Alarm Images Stored in a ComputerClick the Alarm Data indicator while it is red or green Playing Back Expansion Memory Card ImagesPrevious ResolutionEND Alarm Data Deleting Saving Live Images onto a Computer Saving Live Images and Alarm ImagesSaving Alarm Images onto a Computer as Still Images Saving Live Images and Alarm Images Saving All of a Single Alarm Event onto a ComputerWhen the File Download pop-up menu is displayed, click Save Click the Play button and then click the Download buttonWireless LAN SET Settings Camera wired LAN settings TCP/IP settingsWireless LAN device settings TCP/IP settings Camera wireless LAN settings TCP/IP settingsWireless LAN SET Settings Camera Wireless LAN SettingsDescription of Wireless LAN SET Screen Encipherment SettingsPPP Dial-up Settings PPP Connection to an Internet Service ProviderConnecting the camera and installing the software Double-click the Camset icon on the desktopPPP Dial-up Settings Click the SET to Camera buttonClick the Save Info File button Close the Camset windowProvider TEL. no Dial to Provider SettingsAuthentication Dial from PC Setting PPP Connection from a ComputerCamera Computer Telephone lineMake the settings in the PPP setting screen Set the following itemsRS-232C Settings RS-232C SET Language SelectionClick the RS-232C menu select button Click the Language button to change the languageStatus Checking Click the Status menu select buttonFirmware Version SUB-MICROCOMPUTER VersionGlossary of Terms Glossary of Terms Pre-alarm and post-alarm recording If you forget the IP Address TroubleshootingIf the camera cannot be connected Specifications Exclusions Printed on recycled paper 1AC6P1P2677 L5AM2/US 0603KP-CZ

VCC-WB4000 specifications

The Sanyo VCC-WB4000 is an advanced surveillance camera designed primarily for outdoor use, offering state-of-the-art features that cater to a variety of security needs. This robust model stands out for its high-resolution imaging capabilities combined with powerful technologies that ensure reliable performance in various lighting conditions.

At the heart of the VCC-WB4000 is its exceptional image sensor. The camera boasts a 1/3-inch CCD sensor, which delivers clear and detailed images with a resolution of up to 400 TV lines. This ensures that users can capture high-quality footage, even in challenging environments. Additionally, the camera’s 3x optical zoom lens allows for versatile viewing angles and the ability to focus on specific subjects without sacrificing image quality.

One of the defining characteristics of the VCC-WB4000 is its weather-resistant housing. Designed to withstand harsh outdoor conditions, this camera is sealed against dirt and moisture, making it suitable for various climates. Its durable construction not only enhances longevity but also reduces maintenance needs, ensuring consistent performance over time.

The Sanyo VCC-WB4000 also integrates advanced digital signal processing (DSP) technology, which optimizes image clarity and enhances features such as automatic gain control, backlight compensation, and noise reduction. This ensures clear images in both bright and low-light situations, providing reliable monitoring around the clock.

Another notable feature is its flexible installation options. The camera can be mounted on walls or ceilings with ease, and its compact design means it can fit into a variety of settings without drawing excessive attention.

Connectivity is also a strong point for the VCC-WB4000. It incorporates multiple output options, including analog video output, which simplifies integration with existing surveillance systems. This ensures that users can easily incorporate the camera into their security infrastructure without the need for extensive reconfiguration.

In conclusion, the Sanyo VCC-WB4000 is an excellent choice for those seeking a dependable outdoor surveillance solution. With its high-resolution imaging, robust weatherproof design, and advanced features, it stands as a testament to Sanyo’s commitment to providing effective security solutions. Whether for residential, commercial, or industrial applications, the VCC-WB4000 delivers the quality and reliability necessary to keep properties secure.