Sanyo VCC-WB4000 instruction manual Mode, Burst

Page 29

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

CAMERA Settings

1MODE

This sets the DAY/NIGHT mode.

Item

Operation after selection

Required settings

AUTO (p. 29)

Monitoring switches automatically between

2 AGC Gain

color and black & white depending on the

4 LEVEL

 

luminance of the objects.

6 BURST

 

Images are monitored in color regardless

2 AGC Gain

COLOR (p. 29)

of the luminance of the objects. In addition,

3 ALARM OUT

devices such as an infrared sensor can be

5 POLARITY

 

used to externally switch between color

6 BURST

 

and black & white.

 

B/W (p. 30)

Images are monitored in black & white

2 AGC Gain

regardless of the luminance of the objects.

 

 

 

 

Monitoring can be switched between color

2 AGC Gain

TIMER (p. 30)

and black & white after the length of time

3 ALARM OUT

specified.

6 BURST

 

 

 

7 TIMER

 

 

 

2AGC Gain

If the objects are dark, set the AGC Gain to the maximum value so that images are made brighter when they are being monitored. The AGC Gain can be set separately for each mode.

Available settings:

•AUTO: +9dB (default setting), +12dB, +15dB

•COLOR: –6dB, 0 (default setting), +6dB, +9dB, OFF (AGC is not used)

•B/W: –6dB, 0, +6dB (default setting), +9dB, +12dB, +15dB, OFF (AGC is not used)

•TIMER: +9dB (default setting), +12dB, +15dB, OFF (AGC is not used)

Note: When the AGC gain is increased, sensitivity will also be increased for dark objects and they will appear bright, but interference will also increase.

3ALARM OUT (Set when using COLOR and TIMER mode)

When an IR lamp or similar device is connected to the ALARM OUT terminal at the rear of the camera, the IR lamp can be made to illuminate when the mode switches from color to black & white.

Available settings: OFF, NC, NO

4LEVEL (Set when using AUTO mode)

This sets the luminance for switching automatically between color and black & white.

Available settings: LOW, MID (default setting), HIGH (switching at brighter luminances)

5POLARITY (Set when using COLOR mode)

This sets the input polarity for the D/N IN terminal at the rear of the camera. When a device such as an infrared sensor is connected to the D/N IN terminal, it can be used for forcibly switch from color to black & white.

Available settings: NC, NO

6BURST

This sets the color burst for MONITOR OUT connector image signals. Sometimes distortion can occur when the mode switches from color to black & white depending on the connection. If this happens, change this setting to “ON”.

Available settings: OFF, ON

7TIMER (Set when using TIMER mode)

Set the time for switching from color to black & white from the drop-down list boxes. Monitoring will be in color at other times.

Available settings:

•ON: When the set time is reached, monitoring changes to black & white (Default setting: 18:00)

•OFF: When the set time is reached, monitoring changes to color (Default setting: 6:00)

Note: Settings that overlap a day can also be made.

– 28 –

English

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Network Camera VCC-WB4000Contents Pour la clientèle canadienne Information to userFor the customers in Canada Precautions Operating environment FeaturesAccessoriesPower indicator Monitor OUT connectorName and Function of Each Part Lens mount capName and Function of Each Part For C mount type Attaching the LensRemove the lens mount cap Attach the CS mount-type lens Flange Back Adjustment Basic Connections ConnectionsConnections Connecting to a LANInstallation of Plug-in Software to the Computer p Network Camera Wired LAN SettingsWired LAN Settings p Computer Network SET Settings pInstallation of Plug-in Software to the Computer Network Camera Wired LAN SettingsTurn on the power for the computer Click the OK buttonPlug-in software Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Language selection window Wired LAN SettingsExample Subnet mask setting Type Available settings Auto default setting Image quality mode select buttonsInitial Camera Screen FineAlarm button Wireless LAN buttonAlarm indicator Menu select buttonsLit green alarm recording image playback is possible Lit orange alarm recording image playback is not possibleRed indicator Grey indicatorSelection screen example Resolution and Expansion settings default settings 640x480SET button JImage display areaSet the password Network SET SettingsClick the Network menu select button Network SpeedMAC Address display Changing a passwordWhen a password has been changed Turn the camera off and then back on again Changing the Access Level ID2 or ID3For User access level Access Level SettingsFor Operator access level Daylight Saving Mode Clock SET SettingsTimezone Daylight SavingLive Image Camera SettingsCamera Title IrisSetting manual white balance Manual Camera SettingsDAY/NIGHT Settings Setting the camera titleBurst ModeColor Mode Settings Auto Mode SettingsSet Burst to OFF example Click the SET button Set Polarity to no exampleSet AGC Gain to +12 dB example Click the SET button Mode SettingsChange the DAY/NIGHT setting to Color mode Color mode Timer modeChange the DAY/NIGHT setting to Timer mode Connection example FigureClick the Alarm menu select button Alarm SettingsAlarm Settings Alarm Buffering SET Setting Alarm Resolution External Alarm Sensor SettingSet Alarm Buffering to ON, and then click the Detail button Set Alarm REC USE to USE and then click the SET buttonSet the sensor marks Motion Detector SET SettingsExternal Alarm Sensor and Motion Detector Settings Remote Alarm Operations Motion Detector Level Sensitivity SettingAlarm Output for a Specified Period Set Motion Detector Level to 2 exampleContinuous Alarm Output Alarm detected Pre-alarm/Post-alarm RecordingSet Buffering Area to PRE/POST 0/10 Set Buffering Area to PRE/POST 2/8Fixed Settings During Pre/Post-Alarm Recording Recording New Alarm DataInsert the expansion memory card Alarm Data indicator green will illuminateSaving to an Expansion Memory Card Viewing Live Images Click the View Frame menu select button Viewing Live ImagesViewing the View Frame Screen Playing Back Alarm Data in the Camera’s Internal Memory Playing Back Alarm DataDescriptions of Alarm Operation Buttons Frame RatePlaying Back Alarm Images Stored in a Computer Playing Back Alarm DataClick the Alarm Data indicator while it is red or green Playing Back Expansion Memory Card ImagesPrevious ResolutionEND Alarm Data Deleting Saving Live Images onto a Computer Saving Live Images and Alarm ImagesSaving Alarm Images onto a Computer as Still Images Saving All of a Single Alarm Event onto a Computer Saving Live Images and Alarm ImagesWhen the File Download pop-up menu is displayed, click Save Click the Play button and then click the Download buttonCamera wired LAN settings TCP/IP settings Wireless LAN SET SettingsWireless LAN device settings TCP/IP settings Camera wireless LAN settings TCP/IP settingsCamera Wireless LAN Settings Wireless LAN SET SettingsEncipherment Settings Description of Wireless LAN SET ScreenPPP Connection to an Internet Service Provider PPP Dial-up SettingsConnecting the camera and installing the software Double-click the Camset icon on the desktopClick the SET to Camera button PPP Dial-up SettingsClick the Save Info File button Close the Camset windowProvider TEL. no Dial to Provider SettingsAuthentication PPP Connection from a Computer Dial from PC SettingCamera Computer Telephone lineSet the following items Make the settings in the PPP setting screenLanguage Selection RS-232C Settings RS-232C SETClick the RS-232C menu select button Click the Language button to change the languageClick the Status menu select button Status CheckingFirmware Version SUB-MICROCOMPUTER VersionGlossary of Terms Glossary of Terms Pre-alarm and post-alarm recording If you forget the IP Address TroubleshootingIf the camera cannot be connected Specifications Exclusions Printed on recycled paper 1AC6P1P2677 L5AM2/US 0603KP-CZ

VCC-WB4000 specifications

The Sanyo VCC-WB4000 is an advanced surveillance camera designed primarily for outdoor use, offering state-of-the-art features that cater to a variety of security needs. This robust model stands out for its high-resolution imaging capabilities combined with powerful technologies that ensure reliable performance in various lighting conditions.

At the heart of the VCC-WB4000 is its exceptional image sensor. The camera boasts a 1/3-inch CCD sensor, which delivers clear and detailed images with a resolution of up to 400 TV lines. This ensures that users can capture high-quality footage, even in challenging environments. Additionally, the camera’s 3x optical zoom lens allows for versatile viewing angles and the ability to focus on specific subjects without sacrificing image quality.

One of the defining characteristics of the VCC-WB4000 is its weather-resistant housing. Designed to withstand harsh outdoor conditions, this camera is sealed against dirt and moisture, making it suitable for various climates. Its durable construction not only enhances longevity but also reduces maintenance needs, ensuring consistent performance over time.

The Sanyo VCC-WB4000 also integrates advanced digital signal processing (DSP) technology, which optimizes image clarity and enhances features such as automatic gain control, backlight compensation, and noise reduction. This ensures clear images in both bright and low-light situations, providing reliable monitoring around the clock.

Another notable feature is its flexible installation options. The camera can be mounted on walls or ceilings with ease, and its compact design means it can fit into a variety of settings without drawing excessive attention.

Connectivity is also a strong point for the VCC-WB4000. It incorporates multiple output options, including analog video output, which simplifies integration with existing surveillance systems. This ensures that users can easily incorporate the camera into their security infrastructure without the need for extensive reconfiguration.

In conclusion, the Sanyo VCC-WB4000 is an excellent choice for those seeking a dependable outdoor surveillance solution. With its high-resolution imaging, robust weatherproof design, and advanced features, it stands as a testament to Sanyo’s commitment to providing effective security solutions. Whether for residential, commercial, or industrial applications, the VCC-WB4000 delivers the quality and reliability necessary to keep properties secure.
Top Page Image Contents