Sanyo VCC-WB4000 Information to user, For the customers in Canada, Pour la clientèle canadienne

Page 3

L5AM2/US (VCC-WB4000) GB 2003, 6, 6

Information to user

Safety Guard

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For the customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Pour la clientèle canadienne

Cet appareil numerique de la Classe B est conforme à la norme NMB-003 du Canada.

This installation should be made by a qualified service person and should conform to all local codes.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by Sanyo may void the user’s authority to operate this camera.

– 2 –

English

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Network Camera VCC-WB4000Contents Information to user For the customers in CanadaPour la clientèle canadienne Precautions Operating environment FeaturesAccessoriesLens mount cap Monitor OUT connectorPower indicator Name and Function of Each PartName and Function of Each Part Attaching the Lens Remove the lens mount cap Attach the CS mount-type lensFor C mount type Flange Back Adjustment Basic Connections ConnectionsConnections Connecting to a LANComputer Network SET Settings p Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer p Wired LAN Settings pClick the OK button Network Camera Wired LAN SettingsInstallation of Plug-in Software to the Computer Turn on the power for the computerClick the Install button Uninstalling the plug-in softwarePlug-in software Browser Settings Cookie SettingsCamera uses cookies Wired LAN Settings Example Subnet mask setting TypeLanguage selection window Fine Image quality mode select buttonsAvailable settings Auto default setting Initial Camera ScreenMenu select buttons Wireless LAN buttonAlarm button Alarm indicatorGrey indicator Lit orange alarm recording image playback is not possibleLit green alarm recording image playback is possible Red indicatorJImage display area Resolution and Expansion settings default settings 640x480Selection screen example SET buttonNetwork Speed Network SET SettingsSet the password Click the Network menu select buttonChanging a password When a password has been changedMAC Address display Turn the camera off and then back on again Changing the Access Level ID2 or ID3Access Level Settings For Operator access levelFor User access level Daylight Saving Clock SET SettingsDaylight Saving Mode TimezoneIris Camera SettingsLive Image Camera TitleSetting manual white balance Manual Camera SettingsDAY/NIGHT Settings Setting the camera titleBurst ModeSet Polarity to no example Auto Mode SettingsColor Mode Settings Set Burst to OFF example Click the SET buttonSet AGC Gain to +12 dB example Click the SET button Mode SettingsConnection example Figure Color mode Timer modeChange the DAY/NIGHT setting to Color mode Change the DAY/NIGHT setting to Timer modeClick the Alarm menu select button Alarm SettingsAlarm Settings Alarm Buffering SET Setting Set Alarm REC USE to USE and then click the SET button External Alarm Sensor SettingAlarm Resolution Set Alarm Buffering to ON, and then click the Detail buttonSet the sensor marks Motion Detector SET SettingsExternal Alarm Sensor and Motion Detector Settings Set Motion Detector Level to 2 example Motion Detector Level Sensitivity SettingRemote Alarm Operations Alarm Output for a Specified PeriodContinuous Alarm Output Set Buffering Area to PRE/POST 2/8 Pre-alarm/Post-alarm RecordingAlarm detected Set Buffering Area to PRE/POST 0/10Fixed Settings During Pre/Post-Alarm Recording Recording New Alarm DataAlarm Data indicator green will illuminate Saving to an Expansion Memory CardInsert the expansion memory card Viewing Live Images Viewing Live Images Viewing the View Frame ScreenClick the View Frame menu select button Frame Rate Playing Back Alarm DataPlaying Back Alarm Data in the Camera’s Internal Memory Descriptions of Alarm Operation ButtonsPlaying Back Expansion Memory Card Images Playing Back Alarm DataPlaying Back Alarm Images Stored in a Computer Click the Alarm Data indicator while it is red or greenResolution ENDPrevious Alarm Data Deleting Saving Live Images and Alarm Images Saving Alarm Images onto a Computer as Still ImagesSaving Live Images onto a Computer Click the Play button and then click the Download button Saving Live Images and Alarm ImagesSaving All of a Single Alarm Event onto a Computer When the File Download pop-up menu is displayed, click SaveCamera wireless LAN settings TCP/IP settings Wireless LAN SET SettingsCamera wired LAN settings TCP/IP settings Wireless LAN device settings TCP/IP settingsCamera Wireless LAN Settings Wireless LAN SET SettingsEncipherment Settings Description of Wireless LAN SET ScreenDouble-click the Camset icon on the desktop PPP Dial-up SettingsPPP Connection to an Internet Service Provider Connecting the camera and installing the softwareClose the Camset window PPP Dial-up SettingsClick the SET to Camera button Click the Save Info File buttonDial to Provider Settings AuthenticationProvider TEL. no Telephone line Dial from PC SettingPPP Connection from a Computer Camera ComputerSet the following items Make the settings in the PPP setting screenClick the Language button to change the language RS-232C Settings RS-232C SETLanguage Selection Click the RS-232C menu select buttonSUB-MICROCOMPUTER Version Status CheckingClick the Status menu select button Firmware VersionGlossary of Terms Glossary of Terms Pre-alarm and post-alarm recording Troubleshooting If the camera cannot be connectedIf you forget the IP Address Specifications Exclusions Printed on recycled paper 1AC6P1P2677 L5AM2/US 0603KP-CZ

VCC-WB4000 specifications

The Sanyo VCC-WB4000 is an advanced surveillance camera designed primarily for outdoor use, offering state-of-the-art features that cater to a variety of security needs. This robust model stands out for its high-resolution imaging capabilities combined with powerful technologies that ensure reliable performance in various lighting conditions.

At the heart of the VCC-WB4000 is its exceptional image sensor. The camera boasts a 1/3-inch CCD sensor, which delivers clear and detailed images with a resolution of up to 400 TV lines. This ensures that users can capture high-quality footage, even in challenging environments. Additionally, the camera’s 3x optical zoom lens allows for versatile viewing angles and the ability to focus on specific subjects without sacrificing image quality.

One of the defining characteristics of the VCC-WB4000 is its weather-resistant housing. Designed to withstand harsh outdoor conditions, this camera is sealed against dirt and moisture, making it suitable for various climates. Its durable construction not only enhances longevity but also reduces maintenance needs, ensuring consistent performance over time.

The Sanyo VCC-WB4000 also integrates advanced digital signal processing (DSP) technology, which optimizes image clarity and enhances features such as automatic gain control, backlight compensation, and noise reduction. This ensures clear images in both bright and low-light situations, providing reliable monitoring around the clock.

Another notable feature is its flexible installation options. The camera can be mounted on walls or ceilings with ease, and its compact design means it can fit into a variety of settings without drawing excessive attention.

Connectivity is also a strong point for the VCC-WB4000. It incorporates multiple output options, including analog video output, which simplifies integration with existing surveillance systems. This ensures that users can easily incorporate the camera into their security infrastructure without the need for extensive reconfiguration.

In conclusion, the Sanyo VCC-WB4000 is an excellent choice for those seeking a dependable outdoor surveillance solution. With its high-resolution imaging, robust weatherproof design, and advanced features, it stands as a testament to Sanyo’s commitment to providing effective security solutions. Whether for residential, commercial, or industrial applications, the VCC-WB4000 delivers the quality and reliability necessary to keep properties secure.
Top Page Image Contents