Sanyo PLC-XU74 Auto PC button, Zoom buttons, No Show button, Image button, Timer button

Basic Operation

AUTO PC button

Press the AUTO PC button on the remote control to operate the Auto PC function. For more detail, see page 27.

D..ZOOM buttons

Press the D.ZOOM buttons on the remote control to zoom in and zoom out the images. For more detail, see page 33.

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo selection (p.42), the screen changes each time you press the NO SHOW button as follows.

black out ➜ the captured image ➜ normal ➜• • • • •

KEYSTONE button

For detail, see page 22.

IMAGE button

Press the IMAGE button on the remote control to select a desired image level of the screen. For more detail, see pages 30 and 37.

P-TIMER button

Press the P-TIMER button on the remote control. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59).

To stop the P-Timer, press the P-TIMER button. Press the P-TIMER button again, then the P-timer display disappears.

LAMP CONTROL button

Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness of the screen.

Normal. . normal brightness

Auto. . . brightness according with the input signal

Eco........... lower brightness reduces the lamp

power consumption and extends the lamp life.

Remote Control

VOLUME +/- buttons (See p.23.)

KEYSTONE button

(See p.22)

POINT ed buttons

AUTO PC button

IMAGE button

P-TIMER button

NO SHOW button

LAMP CONTROL

button

D..ZOOM buttons

✔Note:

See the previous page for the other buttons.

The message disappears after 4 seconds.

P-Timer display

24