Sanyo PLC-XU74 owner manual Cleaning the Projection Lens, Cleaning the Projector Cabinet

Page 53

Cleaning the Projection Lens

Follow these steps to clean the projection lens.

1

Disconnect the AC power cord before cleaning.

2

Softly wipe the projection lens with a cleaning

 

cloth that contains a small amount of non-abrasive

 

camera lens cleaner, or use lens cleaning paper

 

or a commercially available air blower to clean the

 

lens. Avoid using an excessive amount of cleaner.

 

Abrasive cleaners, solvents, or other harsh

 

chemicals might scratch the surface.

3

When the projector is not in use, replace the lens

 

cover.

Cleaning the Projector Cabinet

Follow these steps to clean the projector cabinet.

1 Disconnect the AC power cord before cleaning.

2 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily soiled, use a small amount of mild detergent and finish with a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface.

3

When the projector is not in use, put the projector

 

in an appropriate carrying case to protect it from

 

dust and scratches.

Maintenance and Cleaning

Maintenance & Cleaning

53

Image 53
Contents Model PLC-XU74 Features and Design Table of Contents Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsMoving the Projector Installing the Projector in Proper PositionAir Circulation Federal Communication Commission Notice CompliancePart Names and Functions Top Controls and Indicators i Speaker Air Intake VentFront BackRear Terminal Top Control Remote Control Operating Range Remote Control Battery InstallationPositioning the Projector InstallationAdjustable Feet Projector side Connecting the AC Power CordCables used for connection Connecting to a ComputerInstallation Connecting to Video Equipment Connecting to Component Video Equipment Basic Operation Selected Input Source and Lamp ModeTurning On the Projector PIN Code Input Dialog BoxBasic Operation Turning Off the ProjectorRemote Control How to Operate the On-Screen MenuTop Control On-Screen MenuMenu Bar Keystone Correction Zoom and Focus AdjustmentRemote Control Operation Sound AdjustmentAuto PC button Timer buttonZoom buttons No Show buttonInput Source Selection Computer InputDirect Operation Source Select MenuComputer System Selection Menu Operation Auto PC Adj Auto PC AdjustmentTo store adjustment parameters Manual PC Adjustment Mode free ResetTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Normal Screen Size AdjustmentTrue WideDigital zoom For zooming in and out the imagesDigital zoom + Source Select Menu Video Video InputInput Source Selection Video, S-Video Input Input Source Selection Component, RGB Scart 21-pinAuto Video System SelectionAV System Menu Video or S-Video AV System Menu ComponentVideo Input CinemaImage 1~4 Tint ColorProgressive Noise reductionProvide the image at a normal video aspect ratio Setting SettingLogo select Logo Logo and Logo PIN code lock settingsDisplay Logo PIN code lock Capture SettingCapture To Enter the Logo PIN code Input search CeilingRear Terminal On start PIN code lock Security Key lock and PIN code lock settingsKey lock Change the PIN code Change the PIN code lock settingLamp counter Factory defaultFan Then check the matters below Maintenance and CleaningMaintenance & Cleaning Attaching the Lens Cover Cleaning the Air FiltersCleaning the Projector Cabinet Cleaning the Projection LensReset the lamp replacement counter Lamp ReplacementLamp Replacement Counter Lamp Handling PrecautionsAppendix TroubleshootingAppendix AppendixComputer Input/Video Input Menu TreeAppendix Video Input Indicators Indicators and Projector ConditionResolution Compatible Computer SpecificationsMechanical Information Technical SpecificationsOptional Parts USB Connector Series B Configurations of TerminalsService Port Connector Terminal Mini DIN 8-PIN PIN Code Number Memo Logo PIN Code Lock NoPart No LG6P1P0156-- KT6AC